Download  Print this page

Whirlpool WGT4027EW Installation Instructions Manual

24" (61 cm) & 27" (69 cm) gas washer/dryer
Hide thumbs

Advertisement

24" (61 cm) & 27" (69 cm) Gas Washer/Dryer
Instructions pour l'installation de la laveuse/sécheuse
à gaz de 24" (61 cm) et 27" (69 cm)
Instrucciones de instalación de la lavadora/secadora
del gas de 24" (61 cm) y 27" (69 cm)

Table of Contents

WASHER/DRYER SAFETY .......................................................... 2
INSTALLATION REQUIREMENTS ............................................... 5
Tools and Parts ..................................................................... 5
LOCATION REQUIREMENTS ...................................................... 7
DIMENSIONS/CLEARANCES ..................................................... 8
DRAIN SYSTEM ......................................................................... 10
ELECTRICAL REQUIREMENTS. ............................................... 11
GAS SUPPLY REQUIREMENTS ................................................ 11
REMOVE SHIPPING STRAP ...................................................... 13
INSTALL LEVELING LEGS ......................................................... 14
REMOVE FOAM PACKING (24" models) .................................. 14
VENTING ..................................................................................... 15
Venting Requirements ........................................................ 15
Plan Vent System ................................................................ 16
Install Vent System ............................................................. 17
CONNECT DRAIN HOSE ........................................................... 18
CONNECT INLET HOSES .......................................................... 19
MAKE GAS CONNECTION ........................................................ 21
CONNECT VENT ........................................................................ 21
LEVEL WASHER/DRYER ........................................................... 22
COMPLETE INSTALLATION CHECKLIST ................................ 23
SEGURIDAD DE LA LAVADORA/SECADORA ......................... 46
REQUISITOS DE INSTALACIÓN ............................................... 49
Herramientas y piezas ....................................................... 49
REQUISITOS DE UBICACIÓN ................................................... 51
DIMENSIONES Y ESPACIOS LIBRES....................................... 52
SISTEMA DE DESAGÜE ............................................................ 54
REQUISITOS ELÉCTRICOS ...................................................... 55
REQUISITOS DEL SUMINISTRO DE GAS ................................ 55
QUITE EL FLEJE DE EMBALAJE .............................................. 57
INSTALACIÓN DE LAS PATAS NIVELADORAS........................ 58
QUITE EL EMBALAJE DE HULE
ESPUMA (modelos de 24") ....................................................... 58
INSTALLATION NOTES
Date of purchase: _________________________________________
Date of installation: _______________________________________
Installer: _________________________________________________
Model number: ___________________________________________
Serial number: ____________________________________________
W10761051A
Installation Instructions
Índice
NOTAS DE INSTALACIÓN
Fecha de la compra: ______________________________________
Fecha de la instalación: ___________________________________
Instalador: _______________________________________________
Número de modelo: _______________________________________
Número de serie: _________________________________________
Table des matières
SÉCURITÉ DE LA LAVEUSE/SÉCHEUSE ................................ 24
EXIGENCES D'INSTALLATION ................................................. 27
Outillage et pièces ............................................................. 27
EXIGENCES D'EMPLACEMENT .............................................. 29
DIMENSIONS/DISTANCES DE DÉGAGEMENT ....................... 30
SYSTÈME DE VIDANGE ............................................................ 32
SPÉCIFICATIONS ÉLECTRIQUES ............................................ 33
SPÉCIFICATIONS DE L'ALIMENTATION EN GAZ ................... 33
ENLEVER LA SANGLE D'EXPÉDITION .................................... 35
INSTALLATION DES PIEDS DE NIVELLEMENT ...................... 36
ENLEVER L'EMBALLAGE EN MOUSSE (modèles de 24") ..... 36
ÉVACUATION ............................................................................. 37
Exigences concernant l'évacuation ................................. 37
Plani cation du système d'évacuation ............................ 38
Installation du conduit d'évacuation ................................ 39
RACCORDEMENT DU TUYAU DE VIDANGE ........................... 40
RACCORDEMENT DES TUYAUX D'ARRIVÉE D'EAU ............. 41
RACCORDEMENT À LA CANALISATION DE GAZ .................. 42
RACCORDEMENT DU CONDUIT D'ÉVACUATION ................. 43
ÉTABLISSEMENT DE L'APLOMB DE
LA LAVEUSE/SÉCHEUSE .......................................................... 44
LISTE DE VÉRIFICATION POUR L'ACHÈVEMENT
DE L'INSTALLATION .................................................................. 45
VENTILACIÓN ............................................................................ 59
Requisitos de ventilación .................................................. 59
Plani cación del sistema de ventilación .......................... 60
Instalación del sistema de ventilación ............................. 61
CONECTE LA MANGUERA DE DESAGÜE ............................... 62
CONECTE LAS MANGUERAS DE ENTRADA .......................... 63
CONEXIÓN DEL SUMINISTRO DE GAS................................... 64
CONECTE EL DUCTO DE ESCAPE .......................................... 65
NIVELACIÓN DE LA LAVADORA/SECADORA ......................... 65
LISTA DE CONTROL PARA LA REALIZACIÓN
DE LA INSTALACIÓN ................................................................. 67
NOTES CONCERNANT L'INSTALLATION
Date d'achat : ____________________________________________
Date d'installation : _______________________________________
Installateur : ______________________________________________
Numéro de modèle : ______________________________________
Numéro de série : _________________________________________

Advertisement

Table of Contents
loading

  Related Manuals for Whirlpool WGT4027EW

  Summary of Contents for Whirlpool WGT4027EW

  • Page 1: Table Of Contents

    24" (61 cm) & 27" (69 cm) Gas Washer/Dryer Installation Instructions Instructions pour l’installation de la laveuse/sécheuse à gaz de 24" (61 cm) et 27" (69 cm) Instrucciones de instalación de la lavadora/secadora del gas de 24" (61 cm) y 27" (69 cm) Table of Contents Table des matières WASHER/DRYER SAFETY ............
  • Page 2: Washer/Dryer Safety

    Washer/Dryer Safety...
  • Page 4 IMPORTANT: When discarding or storing your old clothes dryer, remove the door.
  • Page 5: Installation Requirements

    Installation Requirements Tools and Parts Gather required tools and parts before starting installation. Tools needed: Flat-blade screwdriver #2 Phillips screwdriver Tin snips (new vent installations) Tools needed for gas installations: Adjustable or open-end Level wrench 9/16" (14 mm) 8" or 10" pipe wrench 8"...
  • Page 6 Parts supplied: Alternate parts: (Not supplied with washer/dryer) Your installation may require additional parts. To order, please NOTE: Remove parts package from the washer basket. refer to toll-free numbers on back page of your Use and Care Check that all parts were included. Guide.
  • Page 7: Location Requirements

    Location Requirements Recessed area or closet installation 48 in. (310 cm 3" (76 mm) Front Closet View door Select proper location for your washer/dryer to improve performance and minimize noise and possible “washer walk.” 3" Install your washer/dryer in a basement, laundry room, closet, (76 mm) 24 in.
  • Page 8: Dimensions/Clearances

    Dimensions/Clearances, 27" Models Dimensions Clearances Front View Side Clearances (recommended/minimum) " (692 mm) " (1822 mm) 1"/0" 1"/0" 1" (25 mm/0 mm) (25 mm/0 mm) (25 mm) Side View " (1495 mm) 26" Front/Back/Top Clearances (660 mm) 12" (305 mm) "...
  • Page 9 Dimensions/Clearances, 24" Models Dimensions Clearances Front View Side Clearances (recommended/minimum) " (606 mm) " (1797 mm) 1"/0" 1"/0" 1" (25 mm/0 mm) (25 mm/0 mm) (25 mm) Side View " Front/Back/Top Clearances (911 mm) " (521 mm) 12" (305 mm) "...
  • Page 10: Drain System

    Drain System Floor drain system Drain system can be installed using a oor drain, wall standpipe, oor standpipe, or laundry tub. Select method you need. Floor drain system requires a Siphon Break Kit (Part Number 285834), 2 Connector Kits (Part Number 285385), and an Floor standpipe drain system Extension Drain Hose (Part Number 285863) that may be purchased separately.
  • Page 11: Electrical Requirements

    Electrical Requirements Gas Supply Requirements This washer/dryer is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating, 3-prong, grounding-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed GAS TYPE...
  • Page 12 DRYER GAS CONNECTION GAS SUPPLY LINE Option 1 Must include 1/8" NPT minimum plugged tapping accessible for test gauge connection, immediately upstream of the gas Rigid gas supply line: connection to the washer/dryer. See illustration below. Connect your washer/dryer to the rigid gas supply line using 1/2"...
  • Page 13: Remove Shipping Strap

    Remove Shipping Strap (27" models) Cut shipping strap To avoid oor damage, set washer/dryer onto cardboard before moving across oor. Move washer/dryer close to its nal location. Remove strap, hang tag, and pin Cut the shipping strap about 16" (406 mm) from the plug end. Look for the words “CUT HERE.”...
  • Page 14: Install Leveling Legs

    Install Leveling Legs (27" models) Install Leveling Legs (24" models) To protect the oor, use a large at piece of cardboard from the shipping carton. Gently place the washer/dryer on its side, on Prepare to install leveling feet the cardboard. Install rear leveling legs 1"...
  • Page 15: Venting

    Venting Venting Requirements Exhaust hoods: Must be at least 12" (305 mm) from ground or any object that may obstruct exhaust (such as owers, rocks, bushes, or snow). Recommended Styles: Louvered hood Box hood Acceptable Style: WARNING: To reduce the risk of re, this dryer MUST BE EXHAUSTED OUTDOORS.
  • Page 16: Plan Vent System

    Plan Vent System Recommended exhaust installations Alternate installations for close clearances Typical installations vent the washer/dryer from the rear. Other Venting systems come in many varieties. Select the type best installations are possible. for your installation. Three close-clearance installations are shown.
  • Page 17: Install Vent System

    Special provisions for mobile home installations: Install Vent System The exhaust vent must be securely fastened to a noncombustible portion of the mobile home structure and must not terminate beneath the mobile home. Terminate the exhaust vent outside. Install exhaust hood 12"...
  • Page 18: Connect Drain Hose

    Connect Drain Hose Proper connection of the drain hose protects your oors from damage due to water leakage. To keep the drain hose Place drain hose in standpipe from coming off or leaking, it must be installed according to the following instructions: Drain IMPORTANT: To ensure proper installation, this procedure hose form...
  • Page 19: Connect Inlet Hoses

    Connect Inlet Hoses Washer must be connected to water faucets with new inlet hoses with at washers (not provided). Do not use old hoses. Clear water lines NOTE: Both hoses must be attached and have water owing to inlet valves. If you are only connecting to a cold water faucet, you must use a Y-adapter (not included).
  • Page 20: Secure Drain Hose

    Move washer/dryer to nal location Secure drain hose Laundry Tub Standpipe Wall Outer Access Panel Inner Access Panel (27" model shown) (27" models only) 4.5" 4.5" 4.5" 4.5" 4.5" 4.5" (114 mm) (114 mm) 4.5" 4.5" (113 mm) (113 mm) (113 mm) (114 mm) (113 mm)
  • Page 21: Make Gas Connection

    Make Gas Connection Connecting gas supply to dryer Open shut-off valve A. Flared male tting B. Non- ared male tting A. Closed valve B. Open valve Open shut-off valve in supply line; valve is open when handle Remove red cap from exible gas connector. Remove the is parallel to gas pipe.
  • Page 22: Level Washer/Dryer

    Level Washer/Dryer IMPORTANT: Level washer/dryer properly to reduce excess Tighten leveling feet (27" models) noise and vibration. Check levelness of washer/dryer Jam nut Place level here Place level here When washer/dryer is level, use a 9/16" or 14 mm open-end or adjustable wrench to turn jam nuts counterclockwise on leveling feet tightly against washer/dryer cabinet.
  • Page 23: Complete Installation Checklist

    Complete Installation Checklist Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. Check that you have all of your tools. Dispose of/recycle all packaging materials. Keep the plastic foam for use if the washer/dryer should be transported.