Advertisement
fig. 9
Pull the harness adjuster lock to the desired position according the child's body, as shown
in fig.9d.
Check that the harness straps are snug with just enough room to insert one finger between
child's chest and harness straps fig.9e.
WARNING! Do not place the child in a sleeping bag, blanket or other bulky wrapping before
putting the child in the restraint because the shoulder straps will not fit snugly and the child will
not be safe.
NOTE: New born babies need extra support around the head and body. Please, do not
remove the cushion if you are going to use the car seat for a newborn baby or baby less than
7 months of age.
TAKING THE CHILD OUT OF THE RESTRAINT AND
REMOVING THE RESTRAINT FROM THE VEHICLE
Press the red release button on the buckle in order to unfasten the shoulder straps
(fig.4a and 4b).
Lift up the harness straps and lay them flat on the back of the restraint.
Take the child out of the restraint.
Unbuckle the 3-point vehicle seat belt.
Pull out the vehicle seat belt though the seat belt hooks in the restraint.
Take the restraint out of the vehicle.
NOTE: The product is compatible with the seats of the motor vehicles in mass production.
In case of any doubt it is recommended that you consult with the importer or the authorized
dealer of both the motor vehicle and the car seat.
7
Advertisement
