Function Keys
A.
+/– buttons used to increase/decrease temperatures.
B.
OK-button to confirm settings and go to the next step.
C.
MODE-button to select from the available operating modes.
D.
ESC-button used for ON/OFF, go one step back in menu or
return to main menu by pressing the button more than 3 seconds.
E.
SET-button for settings following commissioning.
F.
+/– buttons used to increase/decrease hours, days and events.
G.
RESET-button to return to factory settings. The programs are
retained in the case of a reset. The date and time must be set
again. Press reset button with a blunt object (pen).
Configuration
General information
For the use of this manual you must observe the following information:
A Sequence of operation
B Pressed buttons are shown in black.
C Flashing elements are shown in black
D Fixed elements are shown in grey
• Buttons which can be pressed during an
action are shown in black. The related display
is also shown in black.
• Follow exactly the numbers of the sequence
of operation.
• The configuration of the device is described
based on configuration.
• After starting the device for the first time, follow the menu for a correct configuration of the device.
• Following commissioning, you can also change the configuration by pressing the SET-button.
Initial start-up
Set date and time
Sequence for setting the date and time during initial start-up.
15/6/2008 appears as factory default.
To set the date and time after initial start-up press the
SET-button, then choose Date or Time Menu with the
upper +/– buttons and confirm with OK.
Rev: 02/15/004