Table of Contents
Advertisement
Programming
To enter;
hold
the
f
button for 8 seconds, the remote emits one long
beep and turns the LED on, the programming main menu has been
accessed.
To exit;
press
and
release
the
f
button to go back and repeat to exit.
1
short and
1
long beep is emitted for each step back, the LED turns
off when programming is exited.
Sensor Adjust
The
B
button is used for sensor adjustment, to avoid unintended
alarm triggers, it is recommenced that an authorized Directed
dealer perform all sensor adjustments.
Remote Features menu
Press
and
release
the :[) button, 2 LED flashes and beeps indi-
cate the remote features menu is accessed and can be set.
Press
buttons indicated below,
1
beep and flash turns the feature on, 2
beeps and flashes turns the feature off.
•
Autolock feature: Press
B
to turn
on/off.
•
Remote Beeps: Press :[) to turn
onloff
•
Car 2 feature: Press {:} to turn
on/off.
Remote Learning
Press
the
:~:}
button, 3 LED flashes and beeps indicates the remote
is ready to program to the system.
Per the instruction in
Remote Pair
under the
Main Menu
section
of this gUide, following step
4
of
Prepare the vehicle
~stem
to
be Paired with
a
new remote.
Press
and
hold
the
LJ
button,
the siren emits one long chirp to confirm the remote has been
learned.
© 2009 Directed Electronics. All rights reserved.
45
Advertisement
Table of Contents
