Turning On The Monitor - HP z34c User Manual

3. Press the hinge release button (1), insert the tab at the bottom of the VESA bracket into the slot on the
back of the display head until the bracket clicks in place (2), and then secure the screw on top of the
bracket to the display head (3).
4. To attach the monitor to a swing arm or other mounting device, insert the four supplied mounting
screws through the holes on the mounting device and into the screw holes on the VESA mounting
bracket.
CAUTION:
device. Installing longer screws may damage the monitor.

Turning on the monitor

1. Set the master power switch on the rear of the monitor to the On position.
2. Press the power button on the source device to turn it on.
Be sure to use the supplied mounting screws when attaching the monitor to a mounting
Turning on the monitor 15