Table of Contents
Advertisement
MPORTANT
I
: Read this instruction manual
before you start up your high pressure washer
for the first time.
This machine is a high pressure washer producing
a water jet under high pressure which is why se-
vere injuries can occur if the safety precautions are
not observed.
Therefore a complete understanding of the con-
tents of this instruction manual is required in order
to prevent injuries to yourself, objects and persons
nearby, and the machine itself.
2 - 13
1.0 Survey of models .................................................. 3
1.1 Model tag ........................................................ 3
1.2 Technical data ................................................. 3
2.0 Instructions for use ............................................... 4
2.1 Starting-up ....................................................... 4
2.2 Operation ........................................................ 4
2.3 Safety devices on the cleaner ......................... 5
2.4 General ........................................................... 5
3.0 Operating instructions .......................................... 6
3.1 Connections .................................................... 6
1. High pressure hose ..................................... 6
2. Water connection ........................................ 6
3. Mains power connection .............................. 6
4. Spray handle - accessories ......................... 7
5. Detergents - dosing unit .............................. 7
3.2 Starting-up procedure ...................................... 8
3.3 Operation ........................................................ 8
how to use detergents ..................................... 8
3.5 End of operation .............................................. 9
3.6 Transport directions ......................................... 9
3.7 Storage - frost protection ................................. 9
4.1 Fields of application ....................................... 10
4.2 Working pressure .......................................... 10
4.3 Detergents ..................................................... 10
4.4 Dosing of detergents ..................................... 10
4.5 Working methods .......................................... 11
5.0 Pre-priming (40C) ................................................ 12
6.0 Maintenance ........................................................ 12
6.1 Cleaning of high pressure nozzle .................. 12
7.0 Trouble shooting and correction ....................... 13
8.0 Functional description ..................................... 98-99
United Kingdom: Health and Safety at work Act 1974 Guidance note p.m. 29
This act imposes certain obligations with regard to safety on both operators and suppliers of machines used in the course of work.
ALTO's policy has always been to ensure, so far as is reasonably practicable, that all ALTO products are safe and without risk to
health when properly used.
Although the proper use will vary from machine to machine there is a constant factor which cannot be overemphasized, namely the
need for a good standard of personal and industrial operation and installation.
ALTO always endeavours to provide customers with adequate information on the products they are using, by the issue of descrip-
tive literature which is constantly being reviewed and updated.
We would also like to remind you of the importance of avoiding misuse and the need to dissemi-nate all relevant information to
individual employees.
If you have any doubts or problems relating to the correct installation, application, storage or handling of any of the products please
do not hesitate to contact your local ALTO distributor.
Details on earth leakage circuit breakers and monitoring devices are available on request.
Designations
(se drawing on the cover)
1. Transport handle
2. Winder for hose/cable
3. Dosing unit for detergents
4. Placing of container
5. Holder for container
6. Start/stop button
7. Control panel with warnings
8. Spray lance (note placing)
9. High pressure hose
10. Electric cable
GB
11. Pressure gauge
12. Connection for high pressure hose
13. Water connection (water inlet filter)
14. Driving wheel
15. Tipping plate
The environmental policy of ALTO
ALTO has made it a natural part of the concept of the
company to reduce the effect on our environ-ment as much
as possible. This plan is effected through a constant devel-
opment in all branches of the company so that the greatest
number of elements in our high pressure washers affects
the environment to a minimum.
This product too is characterised by the attitude of ALTO
towards the environment.
The majority of the incorporated plastic compo-nents and
first and foremost the cabinet is made of the environmen-
tally desirable polypropylene plastic material. The applied
form of the substance can be regranulated, which means
that the substance can be used for other plastic materials
upon discarding.
To ensure the possibilities of recycling the
plastic materials of the product, they have
been marked with a recycling symbol and the
type of material.
It is also a part of our concern for environ-
mental problems that the high pressure
washer is maintenance-free, meaning that the oil in the
high pressure pump will not have to be changed. The oil is
in a closed system and is only changed by an eventual
servicing.
For the production of this high pressure washer the latest
technique and technology has been applied. The consump-
tion of unnecessary subsidiary materials has been mini-
mized, and during the final test of the product the test water
is recycled.
ALTO Cleaning Systems (UK) Ltd.
Gilwilly Industrial Estate, Penrith,
Cumbria - 01768-868995
GB
2
PP
1
3
4
5
8
9
10
10
14
15
6
7
11
12
13
Advertisement
Table of Contents
