Samsung SMT-W5100E Quick Setup Manual page 4

3: Programming System Data Base
Note:
Skip any MMC field that is not mentioned.
Enter the technician mode (MMC 800, pw: 4321).
2.
MMC 830
3.
Verify the desirable system IP and gateway address are in place.
a.
e.g.
System IP:
Gateway:
Netmask:
MMC 831
4.
Verify the desirable system IP and gateway address are in place.
a.
e.g.
System IP:
Gateway:
Netmask:
MMC 849
5.
Use password "0000" to enter.
a.
[ENTER PASSWORD ]
[0000
Select "Dual AP" type.
b.
[SELECT AP TYPE ]
[DUAL AP
Note: System will restart and erase all existing wireless data. Data from MMC 845 to MMC
849 will be reset to the factory default. After system comes back, go back to the MMC 849
and continue the following:
Enable VoWLAN registration.
c.
[REGISTER VoWLAN]
[ENABLE
MMC 848
6.
Set handset IP address for each handset.
a.
[IP:001 USED:
[192.168. 1.101 ]
© SAMSUNG Telecommunications America
192.168.1.5
192.168.1.1
255.255.255.0
192.168.1.7
192.168.1.1
255.255.255.0
]
]
]
]
4
01/2007