Setting The Unlock Time For Zone 2; How To Change The Programming Pin Number; How To Delete All Pin Numbers And Tag Data - ESP EZ-TAG2 User Manual

The green programming LED (top left of keypad) will illuminate.
Note:- if this location already has a pin number or Tag programmed the
LED will turn red.
To delete this location press the star
turn green.
4. Pick up one Tag only and present to the bottom of the reader
(
2 bleeps will be heard.
If further Tags are to be programmed select a the next available location
number (xx).

Setting the Unlock Time for Zone 2

1. Enter programming mode.
A Long bleep will be heard and the green power LED will turn orange.
2. Press the
*
3. Enter the time in seconds for the unlock time from 00 to 99
seconds.

How to Change the Programming Pin Number

1. Enter programming mode.
A Long bleep will be heard and the green power LED will turn orange.
2. Press key followed by the 3 key the orange LED will start to
*
flash.
3. Enter the new programming pin twice.
A conformation bleep will be heard.

How to delete all pin numbers and Tag data

1. Enter programming mode.
A Long bleep will be heard and the green power LED will turn orange.
2. Press key followed by the 8 key the orange LED will start to
*
flash.
3. Press the 8 key twice.
7 conformation bleeps will sound.
) and remove.
key then the 5 key the power LED will start to flash.
* key twice. The LED will now
9