Deleting A Tag/Pin Number From Zone1; Deleting A Tag/Pin Number From Zone2; How To Load Factory Default Settings; How To Disable The Rear Tamper - ESP EZ-TAG2 User Manual

Deleting a Tag/Pin number from Zone1

1. Enter programming mode
A Long bleep will be heard and the green power LED will turn orange.
2. Enter the location number of the pin number/tag you wish to delete
using a 3 digit format (xxx).
The red LED will illuminate.
3. Press the star * key twice.
The LED will now turn green.

Deleting a Tag/Pin number from Zone2

1. Enter programming mode
A Long bleep will be heard and the green power LED will turn orange.
2. Press the * key followed by the 4 key
The orange LED will start to flash
3. Enter the location number of the pin number/tag you wish to delete
using a 2 digit format (xx).
The red LED will illuminate.
4. Press the star *key twice.
The LED will now turn green.

How to load factory default settings

1. Enter programming mode.
A Long bleep will be heard and the green power LED will turn orange.
2. Press the
to flash.
3. Press the 9 key twice.
One bleep will sound and the System will automatically come out of
programming mode.

How to Disable the rear tamper

1. Enter programming mode.
A Long bleep will be heard and the green power LED will turn orange.
2. Press the
to flash.
3. Press the 0 key followed by the 1 key.
The rear tamer is now off.
How to Enable the rear tamper
1. Enter programming mode.
A Long bleep will be heard and the green power LED will turn orange.
10
key followed by the 8 key the orange LED will start
*
key followed by the 6 key the orange LED will start
*