Brief Details Of Programming; How To Enter And Exit Programme Mode; Programming A User Pin Number To Zone 1 - ESP EZ-TAG2 User Manual

Brief details of programming

Access of programming mode.
There are two locations for entering pin or Tags (zone 1 and zone 2).
Zone 1 has 1000 locations available 000-999.
Zone 2 has 10 locations available 00-09.
Programme pin numbers and tags.
Select the lock release time (00-99 seconds)
How to escape programming mode.
Note:- if no keys are press within 30 seconds the unit will
drop out of programming mode.

How to enter and exit programme mode

• To enter programme mode enter the 4 digit pin number twice
(default pin 1234).
• To exit programme mode press the # key.
Zone 1 programming

Programming a User Pin number to Zone 1

Note:- Zone 1 has 1000 locations available from 000 to 999.
1. Enter programming mode
A Long bleep will be heard and the green power LED will turn orange.
2. Enter the vacant location you want to programme the pin number
in using a 3 digit format (xxx).
The green programming LED (top left of keypad) will illuminate.
Note:- if this location already has a pin number or Tag programmed the
LED will turn red.
To delete this location press the star
turn green.
3. Enter the pin number required, a conformation bleep will be
heard.
If further pin numbers are to be programmed select the next available
location number (xxx).
6
* key twice. The LED will now