Switching Of Avaya B169 - Avaya B169 User Manual

Avaya B169 Conference Phone
GENERAL
Using the Avaya as a conference unit
When communication software or audio recording software is started on the computer,
the Avaya B169 microphone is also activated. OmniSound
and echo cancellation. The blue LEDS on the Avaya B169 also light up at the same
time.
 Note that you might need to turn off the automatic audio processing in some VoIP
software. The audio processing shall be done by Avaya B169 for best audio quality.
Disabling USB
The USB connection is automatically activated when the USB cable is connected.
If you choose to make a DECT call or answer an incoming DECT call, the USB connec-
tion is automatically put on hold. During the DECT call, you can manually choose to
enable and disable the USB connection in the connectivity menu.
 Press the
 Select USB and press OK to confirm.
Press the


SWITCHING OF AVAYA B169

It is possible to switch off and on the unit.
 Press the
 Press OK to confirm.
The unit is turned off.
It is possible to switch on the unit by pressing the same button again.
10
key.
key again to close the connectivity menu.
key for 2 seconds.
is now handling full duplex
®
User Guide