Sherwood RD-6505 Operating Instructions Manual page 19

RD-6505(E)_ENG_100517_RD-6505(E)_ENG 2010-05-24 오전 9:59 페이지 19
Adjusting each channel level with test tone
• The volume level of each channel can be adjusted easily with the test tone function.
■Note : When the SPEAKER button is set to off, the test tone function does not work.
1.
Enter the test tone mode.
• The test tone mode is displayed and will be heard from
the speaker of each channel for 2 seconds as follows:
→ FL → C → FR →
Front Center
Left
• When the speaker setting is "N (No)", the test tone of
the corresponding channel is not available.
→ →
SR SL
Front Surround Surround Subwoofer
Right Right Left
2.
At each channel, adjust the level as desired until
the sound level of each speaker is heard to be
equally loud.
SW
• You can select the desired channel with pressing the
CURSOR UP(▲)/DOWN(▼) buttons.
3.
Cancel the test tone function.
19