Sherwood RD-6505 Operating Instructions Manual page 39

RD-6505(E)_ENG_100517_RD-6505(E)_ENG 2010-05-24 오전 9:59 페이지 39
When selecting the DOLBY PLII MUSIC
• You can adjust the various surround parameters for optimum surround effect.
■Note: The parameter settings are valid only when listening in Dolby Pro Logic II Music mode.
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the "PLII MSC", then press the ENTER
button.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the desired parameter.
3.
Press the CURSOR LEFT(◀)/ RIGHT(▶)
buttons to adjust the selected parameter as
desired.
■When selecting the "PANO (Panorama)" mode
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect
with side wall imaging. Select "OFF" or "ON"(default
value:OFF).
■When selecting the "C. WIDTH (Center width)"
control
This adjusts the center image so it may be heard only
from the center speaker, only from the left/right
speakers as a phantom image, or from all three front
speakers to varying degrees. The control can be set in 8
steps from 0 to 7 (default value : 3).
■When selecting the "DIMEN (Dimension)"
control
This gradually adjusts the soundfield either towards the
front or towards the rear. The control can be set in 7
steps from -3 to +3 (default value : 0).
4.
Repeat the above steps 2 and 3 to adjust other
parameters.
39