D-Link 2×1000BASE-T User Manual page 19

1 0 - P o r t 1 0 / 1 0 0 / 1 0 0 0 M b p s G i g a b i t E t h e r n e t S w i t c h
PWR
♦ PWR (Power) After turning on the power, the Power indicator
on the front panel should light to indicate the Switch is
receiving power.
♦ SPEED The indicator lights amber when the port is connected
to 1000Mbps Gigabit Ethernet station and the indicator lights
green when the port is connected to 100Mbps Fast Ethernet
station. Otherwise, this indicator remains off when the port is
connected to a 10Mbps Ethernet station.
♦ LINK/ACT This indicator light green when this port is
connected to a station successful, if this indicator blinking
green means this port will be transmitting or received data on
the network.
♦ FDX/COL This LED indicator light green when a respective
port is in full duplex (FDX) mode. Otherwise, it is blinking green
when collisions are occurring on the respective port.
O f f = 1 0 M G r e e n = 1 0 0 M A m b e r = 1 0 0 0 M
Figure 3-4. LED indicators
17
SPEED
LINK/ACT
FDX/COL