Table of Contents
Advertisement
Rack Installation (optional)
The 10-port 10/100/1000Mbps Gigabit Ethernet Switch can be mounted
in an EIA standard size, 19-inch rack, which can be placed in a wiring
closet with other equipment. To install, attach the mounting brackets
on the switch's front panel (one on each side) and secure them with
the screws provided.
Figure 2- 2A. Attaching the mounting brackets to the Switch
Then, use the screws provided with the equipment rack to mount the
Switch in the rack.
Figure 2-2B. Installing the Switch in an equipment rack
9
Advertisement
Table of Contents
