D-Link DGS-1224T Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. DGS-1224T - Web Smart Switch
  6. Manual

D-Link DGS-1224T Manual

24-port 10/100/1000mbps + 2 combo mini gbic gigabit smart switch
Hide thumbs Also See for DGS-1224T:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Manual
D-Link DGS-1224T
24-Port 10/100/1000Mbps + 2 Combo Mini
GBIC Gigabit Smart Switch
Manual
First Edition
Building Networks for People

Advertisement

Table of Contents
loading

Related Manuals for D-Link DGS-1224T

Summary of Contents for D-Link DGS-1224T

  • Page 1 D-Link DGS-1224T 24-Port 10/100/1000Mbps + 2 Combo Mini GBIC Gigabit Smart Switch Manual First Edition Building Networks for People...

  • Page 2: Table Of Contents

    TABLE OF CONTENT About This Guide ................... 1 Purpose......................1 Terms/Usage....................1 Introduction..................... 2 Gigabit Ethernet Technology..............2 Fast Ethernet Technology................. 3 Switching Technology................4 VLAN (Virtual Local Area Network) ............ 5 Features......................5 Unpacking and In stallation ................7 Unpacking ....................
  • Page 3 Installing the Web Management Utility ..........15 Discovery List ..................16 Monitor List....................17 Device Setting ..................19 Toolbar.......................21 Configuring the Switch ................22 Login ......................22 Setup Menu....................24 Configuring Setup Setting..............24 Port Settings ..................25 VLAN Settings (Virtual Local Area Network) ......27 Trunk Setting ..................28 Mirror Setting ..................28 Device Status..................29 Statistic....................29 System Setting ..................30...

  • Page 4: About This Guide

    1000Mbps Gigabit Ethernet, 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package. Purpose This guide discusses how to install and configure the DGS-1224T Web Smart Switch. Terms/Usage In this guide, the term “Switch” (first letter upper case) refers to your DGS-1224T Web Smart Switch, and “switch”...

  • Page 5: Introduction

    INTRODUCTION This chapter describes the features of the DGS-1224T and some background information about Ethernet/Fast Ethernet/Gigabit Ethernet switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD protocol,...

  • Page 6: Fast Ethernet Technology

    tomorrow’s rapidly improving switching and routing internetworking technologies. And with expected advances in the coming years in silicon technology and digital signal processing that will enable Gigabit Ethernet to eventually operate over unshielded twisted-pair (UTP) cabling, outfitting your network with a powerful 1000-Mbps- capable backbone/server connection creates a flexible foundation for the next generation of network technology products.

  • Page 7: Switching Technology

    Switching Technology Another approach to pus hing beyond the limits of Ethernet technology is the development of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments.

  • Page 8: Vlan (Virtual Local Area Network)

    VLAN (Virtual Local Area Network) A VLAN is a group of end-stations that are not constrained by their physical location and can communicate as if a common broadcast domain, a LAN. The primary utility of using VLAN is to reduce latency and need for routers, using faster switching instead.
  • Page 9 8K unicast addresses entities per device, self-learning, and table aging 400KBytes packet buffer Supports IEEE 802.3x flow control for full-duplex mode ports Supports Port-based VLAN Supports Port -based QoS Supports Port -based Trunking Supports Port-based Mirroring Supports Port -setting for Speed/Disable, Flow control Easy configuration via WEB Browser Easy setting via Web Management Utility Broadcast Storm Protection...

  • Page 10: Unpacking And Installation

    Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: One DGS-1224T Web Smart Switch One AC power cord, suitable for your area’s electrical power connections Four rubber feet to be used for shock cushioning...

  • Page 11: Rack Mounting

    sunlight. Leave at least 10cm of space at the front and rear of the hub for ventilation. Install the Switch on a sturdy, level surface that can support its weight, or in an EIA standard-size equipment rack. For in formation on rack installation, see the next section, Rack Mounting .

  • Page 12: Connecting Network Cable

    Figure 2. Combine the Switch with the provided screws Then, use screws provided with the equipment rack to mount each switch in the rack. Figure 3. Mount the Switch in the rack Connecting Network Cable The Switch supports 1000Mbps Gigabit Ethernet that runs in Auto- negotiation mode and 10Mbps Ethernet or 100Mbps Fast Ethernet that runs both in half and full duplex mode and 1000Mbps Gigabit Ethernet runs in full duplex mode using four pair of Category 5 Cable.

  • Page 13: Ac Power

    AC Power The Switch used the AC power supply 100-240V AC, 50-60 Hz. The power switch is located at the rear of the unit adjacent to the AC power connector and the system fan. The switch’s power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected.

  • Page 14: Identifying External Components

    IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel, and LED indicators of the Switch. Front Panel The figure below shows the front panels of the Switch. Figure 4. Front panel of 24-port Gigabit Smart Switch LED Indicator: Comprehensive LED indicators display the status of the switch and the network (see the LED Indicators chapter below).

  • Page 15: Rear Panel

    Rear Panel ¡´ Reset button Figure 5. Rear panel of the Switch AC Power Connector: This is a three-pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100-240V AC at 50-60Hz.

  • Page 16: Understanding Led Indicators

    UNDERSTANDING LED INDICATORS The front panel LEDs provides instant status feedback, and, helps monitor and troubleshoot when needed. Figure 6. LED indicators of the Switch Power and System LEDs Power: Power Indicator When the Power LED lights on, the Switch is receiving power. When the Power turns off or the power cord has improper connection.

  • Page 17: Ports 1~24 Status Leds

    Ports 1~24 Status LEDs Link/Act: When the Link/Act LED lights on, the respective port is successfully connected to an Ethernet network. Blinking When the Link/Act LED is blinking, the port is transmitting or receiving data on the Ethernet network. No link. 100/1000Mbps Green When the 100 0Mbps LED lights Green, the respective port is connected...

  • Page 18: Configuration

    CONFIGURATION Through the Web Browser you can configure the Switch such as VLAN, Trunking, QoS… etc. With the attached Web Management Utility, you can easily discover all the Web Management Switch, assign the IP Address, changing the password and upgrading the new firmware. Installing the Web Management Utility The following gives instructions guiding you through the installations of the Web Management utility.

  • Page 19: Discovery List

    Figure 7. Web Management Utility The Web Management Utility was divided into four parts, Discovery List, Monitor List, Device Setting and Toolbar function , for details instruction, follow the below section. Discovery List This is the list where you can discover all the Web management devices in the entire network.

  • Page 20: Monitor List

    System word definitions in the Discovery List: MAC Address: Shows the device MAC Address. IP Address: Shows the current IP address of the device. Protocol version: Shows the version of the Utility protocol. Product Name: Shows the device product name. System Name: Shows the appointed device system name.
  • Page 21 View Trap: The Trap function can receive the events that happen from the Web Management Switch in the Monitor List. There is a light indicator behind the “View Trap” button, when the light indicates in green, it means that there is no trap transmitted, and else when it indicates in red, it means that there is new trap transmitted, this is to remind us to view the trap.

  • Page 22: Device Setting

    Add Item: To add a device to the Monitor List manually , enter the IP Address of the device that you want to monitor. Delete Item: To delete the device in the Monitor List. Device Setting You can set the device by using the function key in the Device Setting Dialog box.
  • Page 23 Password Change: You can use this Password Change when you need to change the password, fill in the password needed in the dialog box and press “Set” button to proceed the password change immediately. Figure 11. Password Change Firmware Upgrade: When the device has a new function, there will be a new firmware to update the device, use this function to update.

  • Page 24: Toolbar

    Toolbar The toolbar in the Web Management Utility have four main tabs, File, View, Options and Help. In the “File TAB” , there are Monitor Save, Monitor Save As, Monitor Load and Exit. Monitor Save: To record the setting of the Monitor List to the default, when you open the Web Management Utility next time, it will auto load the default recorded setting.

  • Page 25: Configuring The Switch

    Configuring the Switch The DGS-1224T Web Smart Switch has a Web GUI interface for s mart switch configuration. The Switch can be configured through the Web Brows er. A network administrator can manage, control and monitor the switch from the local LAN. This section indicates how to...
  • Page 26 Or through the Web Management Utility, you do not need to remember the IP Address, select the device shown in the Monitor List of the Web Management Utility to settle the device on the Web Browser. When the following dialog page appears, remain enter the default password "admin"...

  • Page 27: Setup Menu

    Setup Menu When the main page appears, find the Setup menu in the left side of the screen (Figure 16). Click on the setup item that you want to configure . There are eleven options: Port Settings, VLAN Settings, Trunk Setting, Mirror Setting, Device Status, Statistic, System Settings, Trap Setting, Password Setting, Backup Setting and Reset Setting as shown in the Main Menu screen.

  • Page 28: Port Settings

    Port Settings In Port Settings menu (Figure 1 7), this page will show each port’s status, press the ID parameter to set each port’s Speed, Flow Control, QoS priority and Link Status . When you need to renew the posted information, press the “Refresh”...
  • Page 29 To change the port setting, click on the ID parameter to enter to the selected port to configure its Speed/Disable, Flow control and QoS setting. Figure 18 Speed/Disable: This setting has six modes— 100M Full , 100M Half , 10M Full , 10M Half, Auto and Disable —...

  • Page 30: Vlan Settings (Virtual Local Area Network)

    QoS: In some ports that need to have a high priority to manage the data transfer, QoS should be change. Set the port’s QoS to high to determine the port will always transfer their data first. VLAN Settings (Virtual Local Area Network) Group individual ports into a small “Virtual”...

  • Page 31: Trunk Setting

    Trunk Setting The Trunk function enables to cascade two devices with a double times bandwidth (maximum up to 24Gbps in full duplex mode). There are three selections in each group of trunk setting as follow: Group 1: Selection 1(disable), Selection 2(port 1, 2), Selection 3(port 1, 2, 3, 4). Group 2: Selection 1(disable), Selection 2(port9, 10), Selection 3(port 9, 10, 11, 12) Group32: Selection 1(disable), Selection 2(port17, 18), Selection 3(port 17, 18, 19, 20) Figure 21.

  • Page 32: Device Status

    Figure 22. Device Status Click on the “Status” to present the device status on this screen, it will show the System Status, Port Status, VLAN Status, Trunk Status and Mirror Status.. Press “Refresh” when you need to renew the posted information. Statistic The Statistic Menu screen will show the status of each port packet count.

  • Page 33: System Setting

    For Detail packet information, click on the ID parameter as Figure 24. Figure 24. System Setting The System Setting includes the System name, Location name, Login Timeout, IP Address, Subnet Mask and Gateway. Through the Web Management Utility, you can easily recognize the device by using the System Name and the Location Name.

  • Page 34: Trap Setting

    Figure 25. Trap Setting The Trap Setting enables the device to monitor the Trap through the Web Management Utility, set the Trap IP Address of the manager where the trap to be sent. Figure 26. Trap Setting System Events: Monitoring the system’s trap. Device Bootup: a trap when booting up the system.

  • Page 35: Set Password

    Abnormal* Transmit Erro r: a trap when there are transmit data error in copper port. Abnormal*: 50 error packet count within 10 seconds. Set Password Password is the invaluable tool for the manager to secure Web Management Switch, use this function to change the password. If you forget the password, press the “Reset”...

  • Page 36: Reset Setting

    Figure 28. Backup Setting Note: when restoring a recorded file, the current password will not be erased. Reset Setting The Factory Reset button helps you to reset the device back to the default setting from the factory. Be aware that the entire configuration will be reset, the IP address of the device will be set to default setting 192.168.0.1.

  • Page 37: Technical Specifications

    TECHNICAL SPECIFICATIONS General Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3x Full Duplex Flow Control IEEE 802.3z 1000BASE-SX/LX Gigabit Ethernet Protocol CSMA/CD Data Transfer Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex) Rate Fast Ethernet: 100Mbps (half duplex), 200Mbps (full- duplex) Gigabit Ethernet: 2000Mbps (full-duplex)
  • Page 38 Temperature Operating: 0 ~ 50 C, Storage: -10 ~ 70 C Humidity Operating: 10% ~ 90%, Storage: 5% ~ 90% Dimensions 440 x 210 x 44 mm (W x H x D) EMI: FCC Class A, CE Mark Class A Safety: Performance Transmits Method:...

Table of Contents