Unpack The Box - Cisco 1600 series Quick Start Manual

Unpack the Box.

Note: The Cisco 1600 series routers are either of run-from-flash (RFF) or run-from-RAM (RFR) models. In
this document, model names without an R refer to both models. The "Router Memory" section in the hardware
installation guide that came with your router describes the differences between RFF and RFR models.
2
DB-25-to-RJ-45 console
adapter (light gray)
Cisco 1600 Router
Accessory Kit Items
Console cable
(light blue, RJ-45-to-RJ-45)
Power supply
Power cord (black)
DB-9-to-RJ-45 console
adapter (light gray)
Product documentation
Items That You Provide
Serial cable (Cisco 1601)
(blue if ordered from Cisco)
Ethernet AUI cable
10BaseT Ethernet cable
RJ-48S-to-RJ-48S (Cisco 1602)
(blue, if ordered from Cisco)
RJ-45-to-RJ-45
(red if ordered from Cisco for Cisco 1603)
(orange if ordered from Cisco for Cisco 1604)
Ethernet AUI transceiver or Ethernet 10BaseT hub
WAN interface card
(optional, might already be installed)
Phillips screwdriver
(if installing a WAN interface card)