Table of Contents
Advertisement
IP address fields. The result will be shown to the right of each IP address field.
WARNING: Please note that if you are paying for bandwidth usage, activating this function will add
data consumption to your monthly bill. An approximate figure for the additional monthly data
consumption will be indicated directly to the right of the Interval field. Raising the interval value will
lower the monthly consumption.
Should your internet connection drop, you have 3 options on how the router should react:
Redial only (in WAN Ethernet mode: Reinitialize interface). Default value that attempts to
reestablish the broadband connection.
Redial and Restart (the router restarts itself after 3 failed redial attempts). Using this option, your
local area/wireless network will be unreachable for a short while during the restart of the router.
Auto fail-over between interfaces (USB, Ethernet WAN or WiFi Spotboost
must be properly configured in the event of a fail-over between each other. You can check which
interface is your primary connection on the Internet->Connection page. If you have configured
multiple interfaces then you will have the choice to select fail-over prioritization between them.
If you have configured the router to support two modems on the modem settings page then you will
have the choice to select fail-over prioritization between WAN, USB1 and USB2 port
3.2.7
Traffic
It is possible to keep track of how much Internet traffic is consumed each new calendar month. The
data from the previous month is also showed. The chart displays how much data has been
downloaded via the USB modem. A total is calculated for the month per interface.These figures are
automatically updated every five minute, a forced update can be manually requested by pushing
the Update button.
3.2.7.1
Notification of Data Traffic Usage
Upon enabling this feature, the router can send you an SMS and/or E-Mail notification after a
certain amount of data has been consumed by your Internet connection. It will then continuously
update each time it passes that interval, thus providing you with an overview of your monthly data
consumption.
The router can alert you after every 100MB, 250MB, 500MB and 1000MB of downloaded or totally
accumulated bi-directional traffic passed during the calendar month.
Note: By using your USB modem directly in the computer, the router will only be able to display the
amount of data the router itself has consumed when the USB modem is inserted into it. It will not
display what the USB modem has consumed; therefore, to acquire the most accurate accumulated
figures, please contact your Internet service operator.
To enable notification by SMS, go to SMS->Remote Control, and select the Traffic Limit Reached,
located under Notification SMS.
To enable notification by E-Mail, go to System->E-Mail, and enter your E-Mail account
configuration.
Then proceed to Internet->Traffic, and select how often you would like to be notified by SMS and/
or E- Mail for an updated total of your calendar month's data consumption. You can also specify
which kind of data to keep track of (downloaded only, or downloaded and uploaded; depending on
your mobile broadband subscription terms).
For more information, please visit http://www.dovado.com/features/traffic
3.3
LAN
Here you can alter the settings that are relevant to your specific network, such as the Local Area
Network (LAN) IP addressing, the Dynamic IP address pool (DHCP) as well as the Port Forwarding
rules that will allow inbound access to your computers from the outside (Internet).
T h e M o b il e C h o ic e f o r y o u r B r o a d b a n d I n t e r n e t
© 2015 Dovado FZ-LLC
Menu System
11
TM
. These interfaces
Advertisement
Table of Contents
