Table of Contents
Advertisement
10
Reference Manual 8.0.0
Custom WAN MAC Address
Here you can modify your external WAN port Ethernet MAC Address. Enter the MAC Address in
hexadecimal, using the formats: "00:11:22:33:44:55" or "00-11-22-33-44-55"
3.2.5
DNS
Here you can alter the DNS (Domain Name System) settings in the router.
Dynamic DNS Server Settings:
In most cases, the operator which provides the Internet service to your router is handing out a
dynamic IP address (constantly-changing). The Dynamic DNS feature allows you to contact your
router via an easily accessible hostname, such as myrouter.mydyndns.com
The Following Dynamic DNS provider is supported
DynDNS.org
No-IP.com
Loopia.se
freedns.afraid.org
CityNetwork.se
Other Dynamic DNS provider
The following information needs to be filled in
Profile Name The name of the Dynamic DNS profile
Service Provider Select which provider you want to use
Username The username to your Dynamic DNS provider
Password The password to your Dynamic DNS provider
Domain Name here you enter the Dynamic DNS name that you have registered. e.g
example.dyndns.org
Interface Here you can select if you should use the direct IP interface (default) or use the
PPTP interface to update the dynamic DNS
Special note for freedns.afraid.org
Hash freedns.afraid.org does not use usernames, instead they use a private hash signature
Special note for Other Dynamic DNS provider
Service URL here you enter the URL to your Dynamic DNS provider that the router should use
when updating your Dynamic DNS. It uses HTTP Basic authentication to authenticate with the
server
This is an example of a Service URL: http://dyndnsprovider.com/update?
hostname=customhostname
Custom DNS:
If your operator's DNS servers are unavailable, or if you wish to use a 3rd party DNS server, then
insert the IP address of up to two different servers which the router should use. As a result, all
devices on your network will then use those specified DNS servers.
3.2.6
Connection Tracker
In order to ensure maximum Internet availability you can use the Connection Tracker feature.
When inserting a minimum of 2 unique IP addresses, these addresses will be "pinged" with an
interval that you specify in minutes in the Interval field. After entering the selected IP addresses,
you can test the ping function to these addresses by pushing the Test now button directly below the
T h e M o b il e C h o ic e f o r y o u r B r o a d b a n d I n t e r n e t
© 2015 Dovado FZ-LLC
Advertisement
Table of Contents
