Lan Settings - Dovado 3GN Quick Installation Manual

LAN Settings

LAN->LAN Settings: The network settings for the 3GN.
allows you to change the default IP address for your
Network Settings
3GN. However, in most cases you do not need to change this setting.
Note that the IP address for the 3GN is used on your private network
only. It is not possible to change the subnet mask. Click on
Save LAN
and then for the changes to take effect.
Settings Restart
LAN->DHCP: The settings for your private network.
allows you to enable or disable the built-in DHCP server.
DHCP Server
When enabled, all clients on your private network will automatically
obtain an IP address from the range specifi ed under
Client IP Address
(valid range is from 1 to 254). When disabled you have to
Range
manually enter an IP address from this range into each client.
allows you to set a domain name for the
Client Network Information
3GN and specify an additional DNS server.
can be used when you want a client to
Static Address Assignment
obtain the same IP address each time it logs on to your private network.
This setting works no matter if the DHCP Server is enabled or disabled.
Select how you want to identify the client, by hostname or MAC
address (it is possible to defi ne 253 static IP addresses based on MAC
addresses and 256 based on hostnames). Type in the hostname or the
MAC address under and fi nally, set the desired IP address
Host Identifi er
under . Please make sure not to assign the IP address
Internal Address
of the 3GN to any of the clients. Click on Add and then
Save DHCP
when you are fi nished.
Settings
is a function that shows the IP and MAC addresses of
View DHCP Table
all clients that are connected to the 3GN.
36
Advanced settings