Silicon Graphics C220 User Manual page 11

Controls (continued)
Tools 2
Language: OSD controls menus are available in 6 languages.
OSD Position: You can choose where you would like the OSD controls menu to appear on your screen. Selecting OSD
Position allows you to manually adjust the OSD controls menu left, right, up or down.
OSD Turn Off: The OSD controls menu will stay on as long as it is in use. In the OSD Turn Off sub-menu, you can select how
long the monitor waits after the last touch of a button for the OSD controls menu to disappear. The preset choice is in 5
seconds step between 5–120 seconds.
OSD Lock Out: This control completely locks out access to all OSD controls functions except Brightness and Contrast. When
attempting to activate OSD controls while in the lock out mode, a screen will appear indicating that OSD controls are locked
out. To activate the OSD Lock Out function, press SELECT, then press + and hold down simultaneously. To deactivate the
OSD Lock Out, press SELECT, then press + and hold down simultaneously.
Off Mode: Enable:
Disable: The Off Mode reset
NOTE: For standard systems and graphics boards, keep the factory setting at ENABLE.
NOTE: Don't keep the monitor on when 'No Signal' is applied. This could cause image burn in on the screen due to the 'No
Signal' message being displayed.
Clamp Pulse Position Control: Operating your monitor at a nonstandard timing may cause images to appear darker than
normal or have color distortion. Use of the Clamp Pulse Position control will adjust images to their normal state.
Hot Key: This selection allows you to use
Factory Preset: Selecting Factory Preset allows you a reset most OSD control settings back to the factory settings. A warning
statement will appear to confirm that you do want to reset ALL settings. Individual settings can be reset by highlighting the
control to be reset and pressing the RESET button.
Information
Display Mode: Indicates the current mode and frequency setting of the monitor.
Monitor Info: Indicates the model and serial numbers of your monitor.
The Off Mode works normally and all stages of energy savings are utilized.
as brightness control and –/+ as contrast control.
English-6