Table of Contents
Advertisement
The "VGA + Audio CAT5 Extender" accepts one stereo signal (the
left and the right channels) input on an audio jack (similar to a
computer). This stereo signal is broadcasted to the two local audio
outputs and is "mixed" together to form a mono signal before
transmitting to a Remote unit via CAT5 cable. Therefore, the left
channel and the right channel audio signals at a Remote unit are
the same.
After all connections are secured, you may plug in the power
adapters into the power jacks of the Local and the Remote CAT5
Extender units and plug the power adapters into AC outlets.
8
Advertisement
Table of Contents
