Ethernet Configuration; Lan Led Connector (J14, J15, J16) - Aaeon PCM-5894 User Manual

All-in-one single board pentium computer with svga, ethernet and 4 serial ports

Hide thumbs Also See for PCM-5894:

Table of Contents

Ethernet

The mainboard is equipped with a high performance 32-bit PCI-

bus Ethernet interface which is fully compliant with IEEE 802.3

10/100Mbps CSMA/CD standards. It is supported by all major

network operating systems.

Configuration is very simple and is done via the BIOS setup. The

medium type can be configured via the program included on the

utility disk.

You can connect three LED to show the status of the communica-

tion link and traffic.

LAN LED connector

Connector

J14

J15

J16

Ethernet 100/10BASE-T connector (CN14)

100/10BASE-T connects to the mainboard via an adapter cable to

a 10-pin polarized header (CN14). For 100/10BASE-T RJ-45

operation, an adapter cable converting CN14 into a standard RJ-

45 jack is required.

36 PCM-5894 User's Manual

configuration

Function

LED-Tx connector

LED-Rx connector

LED-LINK connector

Table of Contents

Pcm-5894c