Page 2
Amino A129 and will immediately invalidate any product warranty. Your service provider will give you a separate User The first time it is powered, it is possible that the Amino A129 Water and Moisture will immediately start updating itself with the latest operating Guide that will explain how to access the services To reduce the risk of fire or electric shock, this product, its...
Page 3
(4”) of clear space is available at the front, rear, sides and top of • The socket-outlet shall be installed near the equipment and display device. Amino Communications Ltd. will not be held liable the product. shall be easily accessible.
INCLUDED ACCESSORIES * Power Supply Activity LED Flashing = IR command received The front window of the Amino A129 is protected with a clear plastic film. This should be removed and disposed of before using the product. Batteries REAR PANEL...
Page 5
Warning! (TV,VCR, AV Amplifier, etc) and disconnect from the mains electrical supply. CONNECTING YOUR STB TO THE POWER SUPPLY 1. Connect the power supply unit to the DC input of the STB. 2. Connect the AC cable to the power supply unit.
Page 6
Green LED - link, yellow LED - activity Type DC power socket, centre positive AV outputs The Amino 10-way mini-DIN AV connector will have been Input 5V DC, 3A configured to output composite, component or S-Video as specified by your service provider at time of manufacturer.
If you acquired The Amino A129 is intended for the reception of TV picture and if Amino or its suppliers or licensors have been advised of the this product elsewhere, then local law may apply.
Disclaimer The following paragraphs describe requirements and conformity: information required by FCC rules: Amino shall not be liable for any errors contained herein nor for any damages arising out of or related to this document or the Conformity FCC Rules, Part 15...
Need help?
Do you have a question about the A-129 and is the answer not in the manual?
Questions and answers