The silver aluminum case of the AmiNET124 may Warnings, Cautions and Notes are included in the be cleaned with a slightly damp cloth to remove product literature to ensure your safety and the stubborn marks.
Page 3
Do not pick the product up or move the This effect is not a defect of the AmiNET124 but a AmiNET124 whilst it is operating. If the product limitation of the display device. Amino...
Sudan, Syria, or any other country to which the US software in your AmiNET124, you agree to be with respect to the software, including, without has embargoed goods; or any one on the US...
AmiNET124 User Guide 3/6/05 11:47 am Page v Contents Introduction Setting up the Using the Amino Using the Amino Index AmiNET124 remote control remote control with your with your TV About your AmiNET124 AmiNET124 Unpacking the AmiNET124 Configuring the remote...
Page 6
This equipment generates, uses and IP set top box, Model AmiNET124, rated 5V dc, This document is intended for informational and can radiate radio-frequency energy and, if not 1.2A Class III...
Page 7
AmiNET124 User Guide 3/6/05 11:48 am Page 1 Introduction Describes the features provided by your AmiNET124 set top box.
Do not insert or remove a viewing card until prompted by the on-screen display, or you may damage the card. • Insert the card fully into the slot on the front panel on the AmiNET124 with the gold coloured pads facing down and away from you.
Page 9
AmiNET124 User Guide 3/6/05 11:48 am Page 3 Setting up the AmiNET124 Explains how to unpack your AmiNET124 and connect it to your TV, and the other equipment in your audio and video system.
If any of these accessories are missing please contact your service provider. The front window of the AmiNET124 is protected with a clear plastic film, and this should be removed and disposed of before using the product.
Before connecting or disconnecting any cables, switch off all system devices (TV, VCR, AV Amplifier, etc) and disconnect from the mains electrical supply. If your system does not include a VCR connect the RF output from the AmiNET124 directly from the input of your TV.
Page 12
RF antenna IN input of the AmiNET124. • Connect the RF antenna OUT connector on the back of the AmiNET124 to the RF IN connector on the VCR, or on the TV if you do not have a VCR, using a standard RF cable available from retail...
Page 13
TV, taking care to match the color of each plug to its corresponding socket. • If your television only provides an RF input the AmiNET124 will deliver a good picture on the appropriate TV channel, as selected on the AmiNET124 Setup screen. The RF connection also supplies the audio, so a separate audio connection is not required.
Page 14
If you have a separate AV surround sound amplifier with electrical S/P DIF input: • Connect the digital audio output from the AmiNET124 to a suitable digital audio input on the AV amplifier using a standard S/P DIF lead (not supplied) to allow you to listen to Dolby 5.1 surround sound, or Windows Media Audio Pro when available.
Page 9 Setting up the Amino remote control This section explains how to unpack and set up the Amino remote control. Your service provider may have supplied an alternative remote control, in which case please refer to the User Guide supplied by your service provider for instructions on setting up and using the remote control.
Page 16
AmiNET124 User Guide 3/6/05 11:48 am Page 10 Childproof feature You can optionally secure the battery compartment with the screw provided to prevent children from opening the compartment: • Remove the battery cover as described above, and using a suitable screwdriver remove the silver screw at the base of the remote control: •...
Page 17
AmiNET124 User Guide 3/6/05 11:48 am Page 11 Using the Amino remote control with your AmiNET124 Explains how to access all the features of your AmiNET124 using the Amino remote control.
Page 18
• Press the power button on the Amino remote control. When the AmiNET124 is switched on the three status lights on the front panel show what operation it is currently performing. The meaning of each light depends on how the AmiNET124 has been set...
Page 19
11:48 am Page 13 Using the remote to control the AmiNET124 In Set-Top Box (STB) mode, the remote can control the following functions of the AmiNET124: Note! This only applies to the remote control illustrated below. If your service provider has...
Page 20
AmiNET124 User Guide 3/6/05 11:48 am Page 14...
Page 21
AmiNET124 User Guide 3/6/05 11:48 am Page 15 Using the Amino remote control with your TV Explains how to set up and use the Amino remote control to operate your TV.
AmiNET124 User Guide 3/6/05 11:48 am Page 16 Configuring the remote control In order for the remote to transmit the correct signals to control the TV, the remote must be programmed with a three-digit code corresponding to the type of TV in use.
Page 23
AmiNET124 User Guide 3/6/05 11:48 am Page 17 Using the remote control to control a TV In TV mode, the remote can control the following TV functions: Select TV mode Switch on or off the TV power* Switch the TV between Enter a TV channel number available AV inputs†...
Need help?
Do you have a question about the AmiNET124 and is the answer not in the manual?
Questions and answers