Toyota PRIUS 2012 Navigation System Owner's Manual page 199

1. AUDIO/VIDEO SYSTEM OPERATION
CHANNEL CATEGORY
1
Touch either "TYPE
to go to the next or previous category.
PRESETTING A CHANNEL
1
Tune in the desired channel.
2
Touch one of the left side screen but-
tons (1-6) and hold it until a beep is
heard. This sets the frequency to the
screen button. The channel number
will be displayed in the screen button.
To change the preset channel to a differ-
ent one, follow the same procedure.
210
SELECTING A CHANNEL
" or " TYPE"
Tune in the desired channel using one
of the following methods.
Preset tuning: Touch the channel selector
screen button (1-6) to listen to the desired
channel. The selected screen button (1-6)
is highlighted and its related information
appears on the right side of the screen.
To select a channel within the current
category: Press the " " or " " button of
"SEEK/TRACK". The radio will change up
or down to a channel within the current
channel category.
To scan the currently selected channel
category: Touch "SCAN". "SCAN" ap-
pears on the screen. The radio will find the
next channel in the same channel catego-
ry, stay there for a few seconds, and then
scan again. To select a channel, touch
"SCAN" again.
PRIUS (US) NAVI 47719U
12.02.24 09:22