Toyota PRIUS 2012 Navigation System Owner's Manual page 178

CHANGING THE Bluetooth
SETTINGS
®
The Bluetooth settings
changed according to the following
procedures.
■
CHANGING "Bluetooth* Power"
The "Bluetooth* Power" display shows
the following state.
When "Bluetooth* Power" is "On":
®
The Bluetooth device is automatically
connected when the "POWER" switch is in
ACCESSORY or ON mode.
When "Bluetooth* Power" is "Off":
®
The Bluetooth device is disconnected,
and the system will not connect to it next
time.
The "Bluetooth* Power" auto connection
state can be set on or off.
• "On": The auto connection is turned on.
• "Off": The auto connection is turned off.
The auto connection state cannot be
changed from "On" to "Off" while driving,
but it can be changed from "Off" to "On".
1
Touch "Bluetooth* Power".
2
®
Touch "On" or "Off".
can be
3
Touch "Save".
In the event the state of "Bluetooth*
Power" is changed from "Off" to "On",
Bluetooth
■
EDITING THE DEVICE NAME
1
Touch "Device Name".
2
Use the software keyboard to input the
device name and touch "OK".
3
Touch "Save".
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
2. SETUP
®
connection will begin.
PRIUS (US) NAVI 47719U
12.02.24
4
187
09:22