Page 1 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Air Conditioning Anti-lock Brake System Accessory Automatic Locking Retractor Child Restraint System DISP Display Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering Electric Vehicle GAWR Gross Axle Weight Ratings GVWR Gross Vehicle Weight Rating Emission inspection and maintenance LATCH...
Page 2 Abbreviation list ABBREVIATIONS MEANING Tire Identification Number TPMS Tire Pressure Warning System TRAC Traction Control Treadwear Indicators Vehicle Identification Number Vehicle Stability Control...
Page 3: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available on the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 4 ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. High voltage parts and cables on the hybrid vehicles emit approximately the...
Page 5 The computers do not record conversations, sound or pictures. ● Data usage Toyota may use the data recorded in these computers to diagnose malfunc- tions, conduct research and development, and improve quality. Toyota will not disclose the recorded data to a third party except: •...
Page 6 EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained •...
Page 7 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 8 In the event that your vehicle must be disposed of, the hybrid battery must be disposed of by your Toyota dealer or a qualified service shop. If the hybrid battery is not disposed of properly, it...
Page 9 This is a warning against something which, if ignored, may cause damage to the vehicle or its equipment. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 11 TABLE OF CONTENTS Information on the hybrid system and adjusting and op- Before driving erating features such as door locks, mirrors, and steer- ing column. When driving Driving, stopping and safe-driving information. Interior Air conditioning and audio systems, as well as other in- features terior features for a comfortable driving experience.
Page 12 Prius c 2 0 1 2 Quick RefeRence Guide...
Page 13 Owner’s Manual. Each box contains safe operating instructions to help you avoid injury or equipment malfunction. All information in this Quick Reference Guide is current at the time of printing. Toyota reserves the right to make changes at any time without notice.
Page 14: Table Of Contents
Floor mat installation Seat belts Spare tire & tools Star Safety System 26-27 Tire Pressure Monitoring (warning) System Visit your Toyota dealer for information on customizing this feature. Programmable by customer. Refer to the Owner’s Manual for instructions and more information.
Page 15: Voice Command Button
OVERVIEW Instrument panel Steering wheel controls Steering wheel audio controls Voice command button Steering wheel climate controls Multi-Information Display button “TRIP” button Cruise control Ignition switch (standard key) Telephone controls Headlight and turn signal controls/Headlight, turn signal and front fog light controls Power button (Smart Key) Emergency flasher button...
Page 16 Air Conditioning system Shift lever “ECO MODE” switch Parking brake “EV” switch Seat heater controls Wiper and washer controls Tilt and telescopic steering lock release lever Tire Pressure Monitoring (warning) System reset Hood lock release lever Fuel filler door opener Power rearview mirror controls Instrument panel light control If equipped...
Page 17: Instrument Cluster
Master warning Low Tire Pressure Warning Electric power steering system warning Immobilizer system indicator If indicator does not turn off within a few seconds of starting hybrid system, there may be a malfunction. Have vehicle inspected by your Toyota dealer.
Page 18 Headlight low/high beam indicator Turn signal indicator READY indicator EV Drive Mode indicator Eco Mode indicator EV drive indicator Front fog light indicator Slip indicator/Hill-start Assist Control indicator Cruise control indicator Anti-lock Brake System warning If this light flashes, refer to “Cruise control,” Section 2-4, 2012 Owner’s Manual.
Page 19: Keyless Entry 1
OVERVIEW Keyless entry Locking operation Type A Type B Push Unlocking operation Type A Type B Push ONCE: Driver door TWICE: All doors NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for safety.
Page 20 Smart Key system (if equipped) Start function Depress Push brake pedal Carrying Power (without starting hybrid system) Without depressing the brake pedal, pressing the “POWER” switch will change the operation mode in succession from: ACCESSORY Accessories such as the radio will operate. Power ON;...
Page 21: Fuel Tank Door Release And Cap
OVERVIEW Fuel tank door release and cap Turn to open Pull Store NOTE: Tighten until one click is heard. If the cap is not tightened enough, Check Engine “ ” indicator may illuminate. Hood release Pull up latch and Pull raise hood Engage support rod...
Page 22: Engine Maintenance
Light control-Instrument panel Brightness control Engine maintenance Engine oil filler cap Engine coolant reservoir Engine oil level dipstick Windshield washer fluid tank NOTE: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance. Please refer to the “Warranty Maintenance Guide.”...
Page 23: Hybrid Synergy Drive System
FEATURES/OPERATIONS Hybrid Synergy Drive System The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine and electric motor to provide the most efficient combination of power for the vehicle. To conserve energy, when the brakes are applied the braking force generates electricity which is then sent to the traction battery.
Page 24: Auto Lock/Unlock 1
Transmission Park Reverse Neutral Drive Engine brake The “POWER”/ignition switch must be “ON” and the brake pedal depressed to shift from Park. The engine brake is the equivalent of downshifting. Shift to “B” when engine braking is desired (i.e. downhill driving, coasting to a stop, etc.). Eco Mode Push Eco Mode helps achieve low fuel consumption during trips that involve frequent...
Page 25: Seats-Head Restraints
FEATURES/OPERATIONS Seats-Head restraints Front (adjustable type)/Rear center Lock release button Rear outboard Lock release buttons...
Page 26: Seat Adjustments-Front
Seat adjustments-Front Seat position (forward/backward) Height crank (driver side; if equipped) Seatback angle Seat-Folding down rear seat Split rear seats (1) Pull up (2) Fold down Non-split rear seat (1) Pull up (2) Fold down...
Page 27: Windows-Power
FEATURES/OPERATIONS Windows-Power Driver side Window lock switch Down Automatic operation (driver side only) Push the switch completely down or pull it completely up and release to fully open or close. To stop window midway, push the switch in the opposite direction. Window lock switch Deactivates all passenger windows.
Page 28 Lights & turn signals Headlights Headlights Parking lights Low beam High beam flasher High beam Daytime Running Light system (DRL) Automatically turns on the headlights at a reduced intensity. Front fog lights (if equipped) Turn Front fog lights come on only when the headlights are on low beam. Turn signals Right turn Lane change...
Page 29: Air Conditioning/Heating
FEATURES/ OPERATIONS Air Conditioning/ Heating Air Conditioning ON/OFF Temperature setting display Fan speed display Air outlet display Windshield defogger Recirculate cabin air (fresh air when OFF) Airflow vent In “ ” mode, use fresh air (“ ” indicator OFF) to reduce window fogging.
Page 30: Moonroof
Moonroof (if equipped) Sliding operation Tilting operation Push once to open partway; again to open completely. Tilt Open Close Close Recommended open position to minimize wind noise. Push once to open; moonroof will automatically stop at the recommended position. Push again to open completely. Seat heaters (if equipped) Push Push...
Page 31: Audio
FEATURES/OPERATIONS Audio Type 1 Preset buttons - functions in other modes indicated above button Eject CD Push and turn to Push to turn adjust tone ON/OFF & balance Seek station/ CD track select Mode Station/ CD View CD text track select Type 2* Eject CD Touch screen display...
Page 32: Audio
iPod ® /USB/AUX port ® iPod /USB port By connecting a USB-compatible portable audio device or USB memory to the USB port, you can listen to music from the portable audio device or USB memory through the vehicle’s speaker system. AUX port By inserting a mini plug into the AUX port, you can listen to music from a portable audio device through the vehicle’s speaker system while in AUX mode.
Page 33: Cruise Control
FEATURES/OPERATIONS Cruise control (if equipped) Turning system ON/OFF System ON/OFF Functions Increase speed Resume Cancel Decrease speed The set speed may also be cancelled by depressing the brake pedal. The set speed may be resumed once vehicle speed exceeds 25 mph. Parking brake Release Pull...
Page 34: Ev-Drive Mode
EV-Drive Mode Push EV-Drive Mode allows the electric motor (traction motor), powered by the hybrid battery (traction battery), to be used to drive the vehicle under certain driving conditions. Refer to the Owner’s Manual for more details. Tilt and telescopic steering wheel Angle Lock release lever Length...
Page 35: Clock
FEATURES/OPERATIONS Multi-Information Display Push “DISP” to scroll through the following information screens: (1) Energy Monitor (2) Drive Information (3) ECO Score (4) 5min Consumption* (5) ECO Savings (6) ECO Savings Record* (7) Past Record* (8) Settings & Screen Off * Factory default is OFF. To activate, access settings through “Settings & Screen Off.”...
Page 36: Hill-Start Assist Control (Hac)
Telephone controls (Bluetooth ® Microphone (Type A) Microphone (Type B) Audio unit Steering wheel telephone switches Volume End call Start call ® Bluetooth technology allows dialing or receipt of calls without taking hands from the steering wheel or using a cable to connect the telephone and the system. audio/phone,”...
Page 37: Seat Belts
If the tire pressure indicator flashes for more than 60 seconds and then remains on, take the vehicle to your local Toyota dealer. NOTE: The warning light may come on due to temperature changes or changes in tire pressure from natural air leakage. If the system has not been initialized recently, setting the tire pressures to factory specifications should turn off the light.
Page 38: Doors-Child Safety Locks
Door locks Unlock Lock Doors-Child safety locks Rear door Lock Moving the lever to the lock position will allow the door to be opened only from the outside. Spare tire & tools Tool location Luggage floor cover Spare wheel cushions Jack Tool bag* Spare tire...
Page 39 Traction Control helps maintain traction on loose gravel and wet, icy, or uneven surfaces by applying brake force to the spinning wheel(s). Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip. TRAC limits engine output and applies the brakes to the spinning wheel. This transfers power to the wheels that still have traction to help you drive safely.
Page 40: Floor Mat Installation
Floor mat installation There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle has model-specific floor mats. Installation is easy. For safety, follow these steps: •...
Page 41 NOTES...
Page 43 customeR expeRience centeR 1-800-331-4331 printed in u.s.A. 1/12 11-tcs-05109 00505-QRG12-pRic...
Page 44 1-1. Hybrid system Hybrid system features Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles. Be sure you are closely familiar with the char- acteristics of your vehicle, and operate with care. The hybrid system combines the use of a gasoline engine and an electric motor (traction motor) according to driving conditions, improving fuel efficiency and reducing exhaust emissions.
Page 45 1-1. Hybrid system ■ When stopped/during start off The gasoline engine stops* when the vehicle is stopped. During start-off, the electric motor (traction motor) drives the vehicle. At slow speeds or when traveling down a gentle slope, the engine is stopped* and the motor is used. *: However, when the hybrid battery (traction battery) needs to be charged or while the engine is being warmed up, the gasoline engine may not stop automatically.
Page 46 1-1. Hybrid system ■ Regenerative braking In the following situations, kinetic energy is converted to electric energy and deceleration force can be obtained in conjunction with the recharging of the hybrid battery (traction battery). ● The accelerator pedal is released. ●...
Page 47 After the 12-volt battery has discharged or has been changed or removed The gasoline engine may not stop even if the vehicle is running on the hybrid battery (traction battery). If this continues for a few days, contact your Toyota dealer.
Page 48 When in the area surrounding the rear of the vehicle, rather than in front of the vehicle ■ Maintenance, repair, recycling, and disposal Contact your Toyota dealer regarding maintenance, repair, recycling and dis- posal. Do not dispose of the vehicle yourself.
Page 49 1-1. Hybrid system Hybrid system precautions Take care when handling the hybrid system, as it contains a high voltage system (about 520 V at maximum) as well as parts that become extremely hot when the hybrid system is operating. Obey the caution labels attached to the vehicle.
Page 50 If the emergency shut off system activates, your vehicle will not restart. To restart the hybrid system, contact your Toyota dealer. Hybrid warning message A message is automatically displayed when a malfunction occurs in the hybrid system or an improper operation is attempted.
Page 51 If a warning light comes on, a warning message is displayed, or the 12- volt battery has been disconnected The hybrid system may not start. In that case, try to start the system again. If the “READY” indicator does not come on, contact your Toyota dealer. ■ Running out of fuel...
Page 52 1-1. Hybrid system CAUTION ■ High voltage and high temperature precautions The vehicle has high voltage DC and AC systems as well as a 12-volt sys- tem. DC and AC high voltage is very dangerous and can cause severe burns and electric shock that may result in death or serious injury.
Page 53 Carefully inspect the ground under the vehicle. If you find that liquid has leaked onto the ground, the fuel system may have been damaged. Leave the vehicle as soon as possible and contact your Toyota dealer. ■ Nickel-metal hydride battery Your vehicle contains a sealed nickel-metal hydride battery.
Page 54 1-1. Hybrid system NOTICE ■ Hybrid battery air vent ● Do not place foreign objects over or in front of the air vent. The hybrid bat- tery (traction battery) may overheat and be damaged. ● Clean the air vent regularly to prevent the hybrid battery (traction battery) from overheating.
Page 55 1-1. Hybrid system Energy monitor/consumption screen You can view the status of your hybrid system on the multi-informa- tion display and Display Audio system. Display Audio system (if equipped) Multi-information display Energy monitor Display Audio system (if equipped) Press “CAR”. If the “Trip Information”...
Page 56 1-1. Hybrid system Multi-information Display Audio system display When the vehi- cle is powered by the electric motor (traction motor) When the vehi- cle is powered by the gasoline engine When the vehi- cle is powered by both the gas- oline engine and the electric motor (traction...
Page 57 1-1. Hybrid system Multi-information Display Audio system display Hybrid battery (traction bat- tery) status Full Full These images are examples only, and may vary slightly from actual condi- tions.
Page 58 1-1. Hybrid system Trip Information screen (Display Audio system) Press “CAR”. (→P. 35) If the “Energy Monitor” screen is displayed, touch “Trip Information”. Fuel consumption in the past 15 minutes Displays the average vehicle speed since the hybrid system was started. Displays the driving time since the hybrid system was started.
Page 59 1-1. Hybrid system Fuel consumption screen (Multi-information display) There are 2 menu items available for the fuel consumption screen. After pressing the “DISP” switch, select one of the menu items below and the system will change to the details screen. The “5min Consumption”, “Past Record”...
Page 60 1-1. Hybrid system ■ “Past Record” There are 2 types of displays for the past record. Personal best and monthly average can be changed between on the settings screen. (→P. 41) Personal Best Displays the best 3 fuel consumption records and the current fuel consumption ranking.
Page 61 1-1. Hybrid system ■ Remaining hybrid battery (traction battery) charge display The charge amount of the hybrid battery (traction battery) is automatically controlled by the hybrid system. For this reason, even if electricity is recov- ered via the regenerative braking, or electricity is generated via the gasoline engine, the displayed hybrid battery (traction battery) charge amount may not reach the highest level (level 8).
Page 62 1-1. Hybrid system Hybrid vehicle driving tips For economical and ecological driving, pay attention to the following points: ■ Using Eco drive mode →P. 174 ■ Use of Hybrid System Indicator By keeping Hybrid System Indicator within Eco area, more Eco-friendly driving may be possible.
Page 63 1-1. Hybrid system ■ Checking tire inflation pressure Make sure to check the tire inflation pressure frequently. Improper tire inflation pressure can cause poor fuel consumption. Also, as snow tires can cause large amounts of friction, their use on dry roads can lead to poor fuel consumption.
Page 64 1-2. Key information Keys The following keys are provided with the vehicle. Vehicles without a smart key system (vehicles without immo- bilizer system) Master keys Operating the wireless remote control function (→P. 61) Valet key Key number plate Vehicles without a smart key system (vehicles with immobi- lizer system) Master keys Operating the wireless remote...
Page 65 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key (without a smart key system) or mechanical key (with a smart key system) is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 472) ■...
Page 66 When a vehicle key is lost (vehicles with a smart key system) If the key remains lost, the risk of vehicle theft increases significantly. Visit your Toyota dealer immediately with all remaining electronic keys that was provided with your vehicle.
Page 67 1-3. Opening, closing and locking the doors ∗ Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Electronic key Electronic key Electronic key Unlocks and locks the side doors (→P.
Page 68 1-3. Opening, closing and locking the doors Unlocking and locking the doors (front door handles only) Grip the driver’s door handle to unlock the door.* (Grip the pas- senger’s door handle to unlock all doors.) Make sure to touch the sensor on the back of the handle.
Page 69 1-3. Opening, closing and locking the doors Unlocking and locking the back door Press the button to unlock the back door. The door cannot be unlocked for 3 seconds after the door is locked. Press the button to lock the back door.
Page 70 1-3. Opening, closing and locking the doors Antenna location and effective range ■ Antenna location Antennas inside the cabin Antennas outside the cabin Antenna outside the luggage compartment...
Page 71 1-3. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of outside door handle.
Page 72 1-3. Opening, closing and locking the doors ■ When the door cannot be locked by the lock sensor on the surface of the door handle Use your palm to touch the lock sensor. ■ Alarms and warning indicators A combination of exterior and interior alarms as well as warning messages shown on the multi-information display is used to prevent theft of the vehicle and accidents resulting from erroneous operation.
Page 73 1-3. Opening, closing and locking the doors ■ Switching the door unlock function It is possible to set which doors the entry function unlocks using the wireless remote control. STEP Turn the “POWER” switch off. STEP When the indicator light on the key surface is not on, press and hold for about 5 seconds while pressing and holding The setting changes each time an operation is performed, as shown below.
Page 74 1-3. Opening, closing and locking the doors ■ Electronic key battery-saving function When battery-saving mode is set, battery depletion is minimized by stopping the electronic key from receiving radio waves. Press twice while pressing and holding . Confirm that the electronic key indicator flashes 4 times.
Page 75 1-3. Opening, closing and locking the doors ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and immobilizer system from operating properly.
Page 76 1-3. Opening, closing and locking the doors ■ Notes for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 77 To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the vehicle. ● The smart key system can be deactivated in advance. Ask your Toyota dealer for details. ■ To operate the smart key system properly Make sure to carry the electronic key when operating the system.
Page 78 ● Starting the hybrid system and changing “POWER” switch modes: →P. 474 Stopping the hybrid system: →P. 474 ● ■ Customization that can be configured at Toyota dealer Settings (e. g. operation signals) can be changed. (Customizable features: →P. 516)
Page 79 1-3. Opening, closing and locking the doors ■ Certification for the smart key system U.S.A. FCC ID: HYQ23AAB FCC ID: HYQ14FBA NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 80 (→P. 50) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves.
Page 81 1-3. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle. Vehicles without a smart key system Locks all the doors Unlocks all the doors Pressing the button unlocks the driver’s door.
Page 82 1-3. Opening, closing and locking the doors ■ Panic mode Vehicles without a smart key system When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle.
Page 83 1-3. Opening, closing and locking the doors ■ Conditions affecting operation Vehicles without a smart key system The wireless remote control function may not operate normally in the follow- ing situations: ● When the wireless key battery is depleted ● Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electri- cal noise...
Page 84 The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer for details. ■ Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control system) can be changed. (Customizable features →P. 516) ■...
Page 85 1-3. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (if equipped) →P. 47 ■ Wireless remote control →P. 61 ■...
Page 86 1-3. Opening, closing and locking the doors ■ Inside lock buttons Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position. Locking the front doors from the outside without a key STEP Move the inside door lock button to the lock position.
Page 87 1-3. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
Page 88 1-3. Opening, closing and locking the doors Automatic door locking and unlocking systems The following functions can be set or canceled: Function Operation Shift position linked Shifting the shift lever out of P locks all door locking function doors. Shift position linked Shifting the shift lever to P unlocks all doors.
Page 89 If a wrong key is used (vehicles with a smart key system) The key cylinder rotates freely to isolate inside mechanism. ■ Customization that can be configured at Toyota dealer Settings (e.g. unlocking function using a key) can be changed. (Customizable features →P. 516)
Page 90 1-3. Opening, closing and locking the doors CAUTION ■ To prevent an accident Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●...
Page 91 1-3. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the following procedures. ■ Locking and unlocking the back door Wireless remote control →P. 61 Door lock switches →P. 65 Entry function (if equipped) →P.
Page 92 1-3. Opening, closing and locking the doors When closing the back door Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it. CAUTION ■ Caution while driving ●...
Page 93 1-3. Opening, closing and locking the doors CAUTION ■ When children are in the vehicle Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not leave children alone in the luggage compartment. If a child is accidentally locked in the luggage compartment, they could have heat exhaustion.
Page 94 If a bicycle carrier or similar heavy object is attached to the back door, it may fall closed again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended.
Page 95 Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it.
Page 96 1-4. Adjustable components (seats, mirrors, steering wheel) Front seats Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (if equipped) CAUTION ■ Seat adjustment ● Be careful that the seat does not hit passengers or luggage. ● To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary.
Page 97 1-4. Adjustable components (seats, mirrors, steering wheel) Rear seats The seatbacks of the rear seats can be folded down. Folding down the rear seatbacks ■ Before folding down the rear seatbacks Stow the rear seat belt buckles STEP as shown. STEP Stow the seat belts.
Page 98 1-4. Adjustable components (seats, mirrors, steering wheel) STEP Remove the outside head restraints. (→P. 81) STEP Lower the center head restraint to the lowest position. (→P. 81) ■ Folding down rear seatbacks Vehicles with a split rear seats Pull the seatback lock release knob and fold the seatback down.
Page 99 1-4. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
Page 100 1-4. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After returning the rear seatback to the upright position Observe the following precautions. Failure to do so may result in death or serious injury. ● Make sure that the seatback is securely locked in position by lightly pushing it back and forth.
Page 101 1-4. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Vehicles with adjustable type head restraints Pull the head restraint up. Down Push the head restraint down while pushing the lock release Lock release button.
Page 102 1-4. Adjustable components (seats, mirrors, steering wheel) Pull the head restraint up while pressing STEP the lock release button. Lock release buttons ■ Installing the head restraints Front adjustable and rear center head restraints Align the head restraint with installation holes and push it down to the lock posi- tion.
Page 103 1-4. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints (vehicles with adjustable type head restraints) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■...
Page 104 1-4. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 105 1-4. Adjustable components (seats, mirrors, steering wheel) Rear center seat belt ■ Fastening the seat belt The rear center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation.
Page 106 1-4. Adjustable components (seats, mirrors, steering wheel) ■ Releasing the seat belt Release the rear center seat belt only when necessary, such as when folding down the rear seat. For safety, always store the plate in the designated place after releasing it. To release tab “A”, press the STEP release button.
Page 107 1-4. Adjustable components (seats, mirrors, steering wheel) Holding tab “A” and “B” together, STEP insert both tabs all the way into the cover on the roof. With tab “B” inserted all the way STEP into the cover, move tab “A” slightly back toward the cover’s inlet, so that it blocks the inlet.
Page 108 1-4. Adjustable components (seats, mirrors, steering wheel) Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal or side collision.
Page 109 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 110 ● If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer.
Page 111 ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there’s no obvious damage.
Page 112 1-4. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
Page 113 1-4. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP push the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 114 1-4. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view in accordance with the driver's seating posture. Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down.
Page 115 1-4. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.
Page 116 1-4. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. To select a mirror to adjust, STEP press the switch. Left Right To adjust the mirror, press the STEP switch. Right Down Left Folding the mirrors...
Page 117 1-4. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “POWER” switch is in ACCESSORY or ON mode. ■...
Page 118 1-5. Opening and closing the windows and moon roof ∗ Power windows The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing (driver’s window only)* Opening One-touch opening (driver’s window only)* Pushing the switch in the opposite direction will stop win-...
Page 119 1-5. Opening and closing the windows and moon roof ■ The power windows can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “POWER” switch is in ON mode. ■...
Page 120 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after perform- ing the above procedure correctly, have the vehicle inspected by your Toyota dealer. CAUTION ■...
Page 121 1-5. Opening and closing the windows and moon roof ∗ Moon roof Use the overhead switches to open and close the moon roof and tilt it up and down. ■ Opening and closing Opens the moon roof* The moon roof stops slightly before the fully open position to reduce wind noise.
Page 122 1-5. Opening and closing the windows and moon roof ■ The moon roof can be operated when The “POWER” switch is in ON mode. ■ Operating the moon roof after turning the hybrid system off The moon roof can be operated for approximately 45 seconds after the “POWER”...
Page 123 1 second. Then it will tilt down, open and close. Check to make sure that the moon roof is completely closed and then release the switch. If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer.
Page 124 1-5. Opening and closing the windows and moon roof ■ Moon roof open reminder function An alarm will sound and a message is shown on the multi-information dis- play when the driver’s door is opened with the moon roof not fully closed and the “POWER”...
Page 125 1-6. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: ■ Before refueling the vehicle ● Vehicles without a smart key system Turn the engine switch off and ensure that all the doors and windows are closed.
Page 126 1-6. Refueling Hang the fuel tank cap on the STEP back of the fuel filler door. Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction.
Page 127 1-6. Refueling ■ Fuel types Unleaded gasoline (Octane rating 87 [Research Octane Number 91] or higher) ■ Use of ethanol blended gasoline in a gasoline engine ● Use only gasoline containing a maxi- DO NOT use gasoline mum of 10% ethanol. containing more than 10% DO NOT use any flex-fuel or gasoline ethanol.
Page 128 Do not top off the fuel tank ■ When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 129 1-6. Refueling NOTICE ■ Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the emission control system to operate abnormally or damaging fuel system components or the vehicle's painted surface.
Page 130 1-7. Theft deterrent system ∗ Immobilizer system The vehicle’s keys have built-in transponder chips that prevent the hybrid system from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicles without a smart key system The indicator light flashes after...
Page 131 1-7. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type immobilizer system. ■ Conditions affecting operation Depending on the surrounding environment and conditions, the immobilizer system may not operate properly. This may prevent the hybrid system from starting.
Page 132 1-7. Theft deterrent system Theft prevention labels These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.
Page 133 1-8. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back in the seat. (→P. 76) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 134 1-8. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver’s seat. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 135 1-8. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 136 1-8. Safety information SRS side and curtain shield airbags SRS side airbags Can help protect the torso of the front seat occupants. SRS curtain shield airbags Can help protect primarily the head of occupants in the outer seats. Other SRS airbags SRS seat cushion airbags Can help restrain the driver and front passenger.
Page 137 1-8. Safety information SRS airbag system components Curtain shield airbags Driver’s seat cushion airbag SRS warning light and “AIR Side impact sensors (front) BAG ON” and “AIR BAG Seat belt pretensioners and OFF” indicator lights force limiters Side airbags Side impact sensors (front Side impact sensors (rear) door) Front...
Page 138 1-8. Safety information Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
Page 139 1-8. Safety information ■ If the SRS airbags deploy (inflate) ● Bruising and slight abrasions may result from contact with a deploying (inflating) SRS airbag. ● A loud noise and white powder will be emitted. ● Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, parts of the front and rear pillars, and roof side rails, may be hot for several minutes.
Page 140 1-8. Safety information ■ SRS airbag deployment conditions (SRS side and curtain shield air- bags) ● The SRS side and curtain shield airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corre- sponding to the impact force produced by an approximately 3300 lb.
Page 141 1-8. Safety information ■ Types of collisions that may not deploy the SRS airbags (SRS front air- bags/SRS seat cushion airbags) The SRS front airbags and SRS seat cushion airbags do not generally inflate if the vehicle is involved in a side or rear collision, if it rolls over, or if it is involved in a low-speed frontal collision.
Page 142 ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or...
Page 143 1-8. Safety information ● A portion of a door is damaged or deformed, or the vehicle was involved in an accident that was not severe enough to cause the SRS side and cur- tain shield airbags to inflate. ● The pad section of the steering wheel, dashboard near the front passenger air- bag or lower portion of the instrument panel is scratched, cracked, or other-...
Page 144 1-8. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
Page 145 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 146 1-8. Safety information CAUTION ■ SRS airbag precautions ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. ● Do not allow the front seat occupants to hold items on their knees.
Page 147 1-8. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to areas such as a door, windshield glass, side door glass, front or rear pillar, roof side rail and assist grip. ● Vehicles without a smart key system: Do not attach any heavy, sharp or hard objects such as keys and accessories to the key.
Page 148 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 149 1-8. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
Page 150 1-8. Safety information Condition and operation in the front passenger occupant classification system ■ Adult “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights ON” SRS warning light Indicator/ warning light Seat belt reminder light flashing Front passenger airbag Side airbag on the front passenger seat Activated Curtain shield airbag in the front passenger...
Page 151 1-8. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights OFF” Indicator/ warning light SRS warning light Seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag in the front passenger Devices side Seat cushion airbag in the front passenger...
Page 152 1-8. Safety information : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P. 134) : In case the indicator light is not illuminated, consult this manual on how to install the child restraint system properly.
Page 153 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 154 1-8. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 155 1-8. Safety information Forward facing — Convertible seat Booster seat ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the child becomes large enough to properly wear the vehicle’s seat belt. ●...
Page 156 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 157 1-8. Safety information CAUTION ■ Child restraint precautions ● Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front and rear pillars or roof side rails from which the SRS side airbags or SRS curtain shield airbags deploy even if the child is seated in the child restraint system.
Page 158 1-8. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 159 1-8. Safety information Installation with LATCH system Type A STEP Widen the gap in the seat cushion slightly. STEP Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
Page 160 1-8. Safety information Type B STEP Widen the gap in the seat cushion slightly. Latch the buckles onto the STEP LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
Page 161 1-8. Safety information Run the seat belt through the STEP child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. Fully extend the shoulder belt STEP and allow it to retract to put it in lock mode.
Page 162 1-8. Safety information Forward facing ⎯ Convertible seat ■ STEP Rear center seat: Adjust the head restraint to the upmost → position. ( P. 81) Place the child restraint system STEP on the seat facing the front of the vehicle. Run the seat belt through the STEP child restraint system and insert...
Page 163 1-8. Safety information While pushing the child restraint STEP system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 164 1-8. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap STEP Remove the luggage cover (if equipped). (→P. 339) STEP Remove the head restraint (→P.
Page 165 1-8. Safety information CAUTION ■ When installing a booster seat To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to the child. (→P. 88) ■...
Page 166 1-8. Safety information CAUTION ■ When installing a child restraint system ● Shake the child restraint system left and right, and forward and backward to ensure that it has been securely installed. ● After securing a child restraint system, never adjust the seat. ●...
Page 167 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing: ■ Starting the hybrid system → P. 158, 162 ■ Driving STEP With the brake pedal depressed, shift the shift lever to D. (→P.
Page 168 The vehicle is judged to be driving uphill or downhill ● When the accelerator pedal is released ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is rec- ommended: ● For the first 200 miles (300 km): Avoid sudden stops.
Page 169 2-1. Driving procedures ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (→P. 492) ■ For efficient use ● Shift the shift lever to D when driving. In the N position, the gasoline engine operates but electricity cannot be generated.
Page 170 Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. ●...
Page 171 2-1. Driving procedures CAUTION ● Do not shift the shift lever to R while the vehicle is moving forward. Doing so can damage the transmission and may result in a loss of vehicle control. ● Do not shift the shift lever to D while the vehicle is moving backward. Doing so can damage the transmission and may result in a loss of vehicle control.
Page 172 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 173 2-1. Driving procedures CAUTION ■ When the vehicle is stopped ● Do not depress the accelerator pedal unnecessarily. If the vehicle is in any gear other than P or N, the vehicle may accelerate suddenly and unexpectedly, causing an accident. ●...
Page 174 The exhaust system should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in...
Page 175 If the brake system warning light (red indicator) comes on, there may be a malfunction with the brake’s hydraulic system. Immediately stop the vehi- cle in a safe place and contact your Toyota dealer. In this case, the brake pedal should be depressed more firmly than usual and the braking distance will increase.
Page 176 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●...
Page 177 2-1. Driving procedures Engine (ignition) switch (vehicles without a smart key system) ■ Starting the hybrid system STEP Check that the parking brake is set. STEP Check that the shift lever is set in P. STEP Firmly depress the brake pedal. Turn the engine switch to the STEP “START”...
Page 178 2-1. Driving procedures ■ Changing the engine switch positions “LOCK” The steering wheel is locked and the key can be removed. (The key can be removed only when the shift lever is in P.) “ACC” Some electrical components such as the power outlet can be used.
Page 179 ■ If the “READY” indicator does not come on If the “READY” indicator does not come on when you turn the engine switch with the shift lever in P and the brake pedal depressed, contact your Toyota dealer immediately. ■...
Page 180 Do not leave the engine switch in the “ACC” or “ON” position for long periods of time without the hybrid system on. ■ When starting the hybrid system If the hybrid system becomes difficult to start, have your vehicle checked by your Toyota dealer immediately.
Page 181 2-1. Driving procedures Power (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the electronic key on your person starts the hybrid system or changes “POWER” switch modes. ■ Starting the hybrid system STEP Check that the parking brake is set. STEP Check that the shift lever is set in P.
Page 182 2-1. Driving procedures STEP Check that the “READY” indicator is on. If the “READY” indicator changes from a flashing light to a solid light and a beep sound, the hybrid system is starting normally. The vehicle will not move when the “READY” indicator is off. The vehicle can move when the “READY”...
Page 183 2-1. Driving procedures ■ Changing “POWER” switch modes Modes can be changed by pressing the “POWER” switch with brake pedal released. (The mode changes each time the switch is pressed.) Off* The emergency flashers can be used. The multi-information display is off.
Page 184 2-1. Driving procedures When stopping the hybrid system with the shift lever in a position other than P If the hybrid system is stopped with the shift lever in a position other than P, the “POWER” switch will not be turned off but instead be turned to ACCESSORY mode.
Page 185 If the hybrid system does not start ● The immobilizer system may not have been deactivated. (→P. 110) Contact your Toyota dealer. ● Check that the shift lever is securely set in P. The hybrid system may not start if the shift lever is not securely in the P position.
Page 186 If the “READY” indicator does not come on If the “READY” indicator does not come on when you press the “POWER” switch with the shift lever in P and the brake pedal depressed, contact your Toyota dealer immediately. ■ If the hybrid system is malfunctioning →P.
Page 187 When “CHECK SMART KEY SYSTEM” is displayed on the multi-infor- mation display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. Failure to do so may lead to the system operat- ing abnormally and possibly cause an accident or damage to the vehicle. ■...
Page 188 Toyota dealer immediately. ■ Symptoms indicating a malfunction with the “POWER” switch If the “POWER” switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction. Con- tact your Toyota dealer immediately.
Page 189 2-1. Driving procedures EV drive mode In EV drive mode, the electric motor (traction motor), powered by the hybrid battery (traction battery), is used to drive the vehicle. This mode allows you to drive in residential areas early in the morn- ing and late at night, or in indoor parking lots etc.
Page 190 2-1. Driving procedures ■ Switching to EV drive mode when the gasoline engine is cold If the hybrid system is started while the gasoline engine is cold, the gasoline engine will start automatically after a short period of time in order to warm up.
Page 191 2-1. Driving procedures ■ Automatic cancelation of EV drive mode When driving in EV drive mode, the gasoline engine may automatically restart in the following situations. When EV drive mode is canceled, a buzzer will sound and the EV drive mode indicator will flash and go off. ●...
Page 192 2-1. Driving procedures Hybrid transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Vehicles without a smart key system While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. Vehicles with a smart key system While the “POWER”...
Page 193 2-1. Driving procedures ■ Shift position purpose Shift position Function Parking the vehicle/starting the hybrid system Reversing Neutral Normal driving Position for engine braking : To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving. ■...
Page 194 2-1. Driving procedures ■ Operation of the air conditioning system in Eco drive mode Eco drive mode controls the heating/cooling operations and fan speed of the air conditioning system to enhance fuel efficiency. (→P. 242) To improve air conditioning performance, adjust the temperature setting or fan speed, or turn off Eco drive mode.
Page 195 2-1. Driving procedures Turn signal lever The turn signal lever can be used to show the following intentions of the driver: Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever.
Page 196 2-1. Driving procedures Parking brake To set the parking brake, fully pull the parking brake lever while depressing the brake pedal. release parking brake, slightly raise the lever and lower it com- pletely while pressing the button. U.S.A. Canada ■ Parking brake engaged warning buzzer A buzzer will sound if the vehicle is driven at a speed of approximately 3 mph (5 km/h) or more with the parking brake engaged.
Page 197 2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
Page 198 2-2. Instrument cluster Gauges and meters Speedometer Displays the vehicle speed. Shift position display Displays the selected shift position. (→P. 173) Fuel gauge Displays the quantity of fuel remaining in the tank. Multi-information display Presents the driver with a variety of driving-related data. (→P. 185)
Page 199 2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted by turn- ing the dial. Brighter Darker ■ The meters and multi-information display illuminate when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “POWER”...
Page 200 2-2. Instrument cluster NOTICE ■ To prevent damage to the engine and its components This vehicle is not installed with an engine coolant temperature gauge. Instead, is shown on the multi-information display. The engine may be overheating if is shown on the multi-information display. In this case, immediately stop the vehicle in a safe place.
Page 201 2-2. Instrument cluster Indicators and warning lights The indicators and warning lights on the instrument cluster inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustration displays all indicators and warning lights illuminated.
Page 202 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light flashes to indicate that the system is operating.
Page 203 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : For vehicles sold in U.S.A.
Page 204 2-2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of driving-related data including the current outside air temperature. ● Drive information Displays information such as the hybrid system operating conditions and fuel consump- tion. ● Settings and screen off Perform operations such as changing the date/time and screen settings.
Page 205 2-2. Instrument cluster Touch tracer display (vehicles with Display Audio system) When a steering wheel switch is touched, an illustration of the switch is shown on the screen, helping the driver to confirm which switch they are touching without needing to look down at their hands.
Page 206 2-2. Instrument cluster Items displayed in the upper part of the screen The following items are always displayed in the upper part of the screen. (When using some menu items, these items will not be dis- played.) Odometer/trip meter →P. 188 Average fuel consumption Depending on whether the odometer or trip meter is displayed, the displayed contents differ.
Page 207 2-2. Instrument cluster ■ Odometer/trip meter Each time the “TRIP” switch is pressed, the display changes as fol- lows: Odometer Displays the total distance that the vehicle has been driven. Some models, pressing and holding the “TRIP” switch will switch the dis- play between MPH and km/h.
Page 208 2-2. Instrument cluster Switching menu screens Each time the “DISP” switch is pressed, the menu screen changes. When the desired menu screen is displayed, stop pressing the “DISP” switch. The details screen will soon be displayed. However, to display the “Settings & Screen Off” details screen, press and hold the “DISP”...
Page 209 2-2. Instrument cluster “ECO Savings” If the price of gasoline is input, the cost of the consumed fuel according to the driven distance is displayed. If the fuel consumption comparison is set, the difference between the input fuel consumption and your vehicle's actual fuel consumption is expressed as an amount of money that was possibly saved.
Page 210 2-2. Instrument cluster ● When the trip meter is displayed: the record since the trip meter was reset is displayed. The record for trip meter A and trip meter B is displayed separately. When the trip meter is reset, the record is also reset. (→P. 188) Average speed Average speed will be displayed.
Page 211 2-2. Instrument cluster ■ “ECO Score” Hybrid battery (traction battery) charge level display EV drive indicator lamp Illuminates when only the electric motor is used to drive the vehicle Hybrid System Indicator Hybrid System Indicator represents the hybrid system power output and regenerative charging.
Page 212 2-2. Instrument cluster ■ “ECO Savings” Basic display Detailed display With 2 types of displays available, the cost of the consumed fuel can be displayed or the fuel consumption's comparison can be displayed. Switching between basic display and detailed display can be performed on the screen settings screen.
Page 213 2-2. Instrument cluster The cost of consumed fuel per mile/kilometer (your car) The more fuel efficient your driving is, the further left the vehicle mark moves. ■ “ECO Savings Record” If the fuel consumption compari- son is input in “ECO Savings”, the savings history will be dis- played.
Page 214 2-2. Instrument cluster Hybrid System Indicator Charge area Shows energy regeneration* status. Regenerated energy will be used to charge the hybrid battery (traction battery). *: When used in this manual, “regeneration” refers to the conversion of energy created by the movement of the vehicle into electrical energy. Hybrid Eco area Shows that gasoline engine power is not being used very often.
Page 215 2-2. Instrument cluster Screen settings If “Settings & Screen Off” is selected on the menu screen, the follow- ing items can be set. Always perform this operation after stopping the vehicle in a safe place. (Some items cannot be set while driving.) Press the “DISP”...
Page 216 2-2. Instrument cluster ■ Basic settings/Changing the clock shortcut The date, time, clock mode (12 or 24 hour), touch tracer settings and the displayed language can be changed. ● Pressing the “DISP” (forward) or “TRIP” (back) switch changes the date. ●...
Page 217 2-2. Instrument cluster ■ “ECO savings” settings The gasoline price and fuel consumption comparison settings can be set, and the screen settings can be changed between basic and detailed. ● To input the gasoline price, press the “DISP” (to increase) or “TRIP”...
Page 218 2-2. Instrument cluster ■ Menu screen selection The following screen changes and settings can be performed: • The savings record screen can be switched on or off. • The 5 minute fuel consump- tion screen can be switched on or off. •...
Page 219 2-2. Instrument cluster ■ The clock is displayed when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “POWER” switch is in ON mode. ■ Eco score ● As the accelerator pedal is not depressed, the driven distance using cruise control (if equipped) is not included in the eco score.
Page 220 2-2. Instrument cluster CAUTION ■ Eco score Eco score should be used as a guide only. Always drive safely in accor- dance with road and traffic conditions. NOTICE ■ The multi-information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display.
Page 221 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. Turning the end of the lever turns on the lights as follows: Type A The daytime running lights turn on. side marker, parking, tail, license plate, daytime run- ning lights and instru- ment panel lights turn The headlights and...
Page 222 2-3. Operating the lights and wipers Type B The daytime running lights turn on. side marker, parking, tail, license plate, daytime run- ning lights and instru- ment panel lights turn The headlights and all lights listed above (except daytime run- ning lights) turn on.
Page 223 2-3. Operating the lights and wipers ■ Daytime running light system ● To make your vehicle more visible to other drivers, the headlights turn on automatically (at a reduced intensity) whenever the hybrid system is started and the parking brake is released. Daytime running lights are not designed for use at night.
Page 224 2-3. Operating the lights and wipers ■ Customization that can be configured at Toyota dealer Setting of the daytime running light system can be changed. (Customizable features: →P. 516) NOTICE ■ To prevent 12-volt battery discharge Do not leave the lights on longer than necessary when the hybrid system is...
Page 225 2-3. Operating the lights and wipers ∗ Fog light switch The fog lights secure excellent visibility in difficult driving condi- tions, such as in rain and fog. Type A Turns the front fog lights off Turns the front fog lights on ∗...
Page 226 2-3. Operating the lights and wipers Type B Turns the front fog lights off Turns the front fog lights on ■ Fog lights can be used when The headlights are on in low beam.
Page 227 2-3. Operating the lights and wipers Windshield wipers and washer The wiper operation is selected by moving the lever as follows: Type A Intermittent wind- shield wiper opera- tion speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation Increases the intermittent...
Page 228 2-3. Operating the lights and wipers Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. Type B Intermittent wind- shield wiper opera- tion speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation...
Page 229 2-3. Operating the lights and wipers Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. ■ The windshield wipers and washer can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “POWER”...
Page 230 Do not operate the switch continually as the washer fluid pump may over- heat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 231 2-3. Operating the lights and wipers ∗ Rear window wiper and washer The wiper operation is selected by moving the lever as follows: Type A Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts.
Page 232 2-3. Operating the lights and wipers Type B Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts. ■ The rear window wiper and washer can be operated when Vehicles without a smart key system The engine switch is in the “ON”...
Page 233 Do not operate the switch continually as the washer fluid pump may over- heat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 234 2-4. Using other driving systems ∗ Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch ■ Setting the vehicle speed STEP Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come on.
Page 235 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 236 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer.
Page 237 2-4. Using other driving systems CAUTION ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 238 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 239 2-4. Using other driving systems When the TRAC/VSC/ABS/hill-start assist control systems are operating The slip indicator light will flash while the TRAC/VSC/ABS/hill- start assist control systems are operating. The stop lights and high mounted stoplight turn on when the hill- start assist control system is operating.
Page 240 The ABS, TRAC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction.
Page 241 2-4. Using other driving systems Hill-start assist control Assists with starting off and temporarily maintains braking power even if the foot is removed from the brake pedal when starting off on an incline or a slippery slope. To engage hill-start assist con- trol, further depress the brake pedal when the vehicle is stopped completely.
Page 242 If a buzzer other than the hill-start assist control buzzer is sounding, the hill-start assist control buzzer may not sound. ■ If the slip indicator comes on It may indicate a malfunction in the system. Contact your Toyota dealer. CAUTION ■ Hill-start assist control ●...
Page 243 2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load: ● Stow cargo and luggage in the luggage compartment whenever possible. ● Be sure all items are secured in place. ●...
Page 244 Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (→P. 490) Toyota does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing. Example based on your vehicle Cargo capacity Total load capacity When 2 people with the combined weight of 366 lb.
Page 245 2-5. Driving information CAUTION ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may result in death or serious injury.
Page 246 2-5. Driving information CAUTION ■ Capacity and distribution ● Do not exceed the maximum axle weight rating or the total vehicle weight rating. ● Even if the total load of occupant's weight and the cargo load is less than the total load capacity, do not apply the load unevenly. Improper loading may cause deterioration of steering or braking control which may cause death or serious injury.
Page 247 Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ■ Towing capacity Toyota does not recommend towing a trailer with your vehicle. ■ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
Page 248 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 249 2-5. Driving information ■ When driving the vehicle Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road conditions. ■ When parking the vehicle Park the vehicle and move the shift lever to P without setting the parking brake.
Page 250 2-5. Driving information ■ Tire chain installation Observe the following precautions when installing and removing chains: ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires only. Do not install tire chains on the rear tires.
Page 251 NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 252 Trailer towing Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your vehicle is not designed for trailer towing or for the use of tow...
Page 253 2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with the four wheels on the ground.
Page 254 2-5. Driving information...
Page 255 2-5. Driving information...
Page 256 3-1. Using the air conditioning system and defogger Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Cooling and dehumidification Temperature display Windshield function on/off button defogger button Fan speed display Air outlet display Outside/recirculated air mode button Air outlet selector button...
Page 257 3-1. Using the air conditioning system and defogger Using the automatic air conditioning system STEP Press The air conditioning system begins to operate. Air outlets and fan speed are automatically adjusted according to the temper- ature setting. STEP To adjust the temperature setting, turn clockwise to increase the temperature and turn counterclockwise to...
Page 258 3-1. Using the air conditioning system and defogger Defogging the windshield Press dehumidification function operates speed increases. Set the outside/recirculated air mode button to the outside air mode if the recirculated air mode is used. (It may switch automati- cally.) To defog the windshield and the side windows early, turn the air flow and temperature up.
Page 259 3-1. Using the air conditioning system and defogger Air flows to the upper body and feet. : Some models Air flows mainly to the feet. *: When the warming function is operating, air flows to the upper body as well to warm the upper body effectively.
Page 260 3-1. Using the air conditioning system and defogger Switching between outside air and recirculated air modes Press The mode switches between outside air mode (the indicator is off) and recirculated air mode (the indicator is on) each time the button is pressed.
Page 261 3-1. Using the air conditioning system and defogger Open the vent. Close the vent. Steering wheel switches Temperature control Press “∧” on to increase temperature “∨” decrease the temperature. Outside air or recirculated air mode The mode switches between out- side air mode and recirculated air mode each time is pressed.
Page 262 3-1. Using the air conditioning system and defogger ■ Operation of the air conditioning system in Eco drive mode In Eco drive mode, the air conditioning system is controlled as follows to pri- oritize fuel efficiency: ● Heating/cooling capacity is restricted. ●...
Page 263 3-1. Using the air conditioning system and defogger ■ Outside/recirculated air mode ● When driving on dusty roads such as tunnels or in heavy traffic, set the outside/recirculated air mode button to the recirculated air mode. This is effective in preventing outside air from entering the vehicle interior. Dur- ing cooling operation, setting the recirculated air mode will also cool the vehicle interior effectively.
Page 264 3-1. Using the air conditioning system and defogger ■ Air conditioning filter →P. 395 ■ When operating the steering switches →P. 186 CAUTION ■ To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 265 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Defoggers are used to defog the rear window, and to remove rain- drops, dew and frost from the outside rear view mirrors. Turns the defoggers on/off The defoggers will automati- cally turn off after approxi- mately 15 minutes.
Page 266 3-2. Using the audio system Audio system types Without Display Audio system CD player and AM/FM radio Title Page Using the radio P. 252 Using the CD player P. 254 Playing back MP3 and WMA discs P. 259 Operating an iPod P.
Page 267 3-2. Using the audio system With Display Audio system Owners of models equipped with a Display Audio system should refer to the “Display Audio System Owner's Manual”. ® ■ About Bluetooth The Bluetooth wordmark and logo are owned by Bluetooth SIG. and permission has been granted to use the trademark of the licensee Panasonic Corporation.
Page 268 3-2. Using the audio system CAUTION ■ U.S.A. (without Display Audio system) Part 15 of the FCC Rules FCC ID: ACJ932PTA184 FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Page 269 3-2. Using the audio system CAUTION Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that neces- sary for successful communication.
Page 270 3-2. Using the audio system CAUTION ■ For vehicles sold in the U.S.A. (with Display Audio system) FCC ID: BABFT0032A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 271 3-2. Using the audio system CAUTION ■ For vehicles sold in Canada (with Display Audio system) IC: 2024B-FT0032A CAUTION: Radio Frequency Radiation Exposure This equipment complies with IC radiation exposure limits set forth for uncontrolled equipment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
Page 272: Using The Radio
3-2. Using the audio system Using the radio Power Volume Adjusting the frequency or Station selector selecting items Seeking the frequency Scanning for AM/FM mode receivable stations button Setting station presets ∧ STEP Search for desired stations by turning or pressing “ ”...
Page 273 3-2. Using the audio system Scanning radio stations ■ Scanning the preset radio stations STEP Press and hold until you hear a beep. Preset stations will be played for 5 seconds each. STEP When the desired station is reached, press again.
Page 274: Using The Cd Player
3-2. Using the audio system Using the CD player Power Volume CD eject Random playback Selecting a Repeat play track or displays track list Playback Search playback Fast-forwarding Selecting a track or reversing Displays text message Loading CDs Insert a CD. Ejecting CDs Press and remove the CD.
Page 275 3-2. Using the audio system Selecting a track from a track list STEP Press The track list will be displayed. STEP Turn and press to select a track. To return to the previous display, press (BACK). Scanning tracks STEP Press The first 10 seconds of each track will be played.
Page 276 Operation has stopped due to a high temperature inside the player. Wait for a while and then press . If the CD still cannot be played back, contact your Toyota dealer. ■ Discs that can be used Discs with the marks shown below can be used.
Page 277 3-2. Using the audio system CAUTION ■ Certification for the CD player This product is a class I laser product. ● A laser beam leak may result in hazardous radiation exposure. ● Do not open the cover of the player or attempt to repair the unit yourself. Refer servicing to qualified personnel.
Page 278 3-2. Using the audio system NOTICE ● CDs with a transparent or translucent recording area ● CDs that have had tape, stickers or CD- R labels attached to them, or that have had the label peeled off ■ CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself.
Page 279: Playing Back Mp3 And Wma Discs
3-2. Using the audio system Playing back MP3 and WMA discs Power Volume Disc eject Random playback Selecting a file Repeat play or displays folder list Playback Search playback Selecting a file Selecting a folder, fast- Displays text message forwarding or reversing Loading and ejecting MP3 and WMA discs →P.
Page 280 3-2. Using the audio system STEP Turn and press to select a folder and a file. To return to the previous display, press (BACK). ■ Returning to the first folder Press and hold ) until you hear a beep. Scanning a folder STEP Press and hold until you hear a beep.
Page 281 3-2. Using the audio system Random playback Pressing (RDM) changes modes in the following order: Folder random → Disc random → Off Repeat play Pressing (RPT) changes modes in the following order: File repeat → Folder repeat* → Off *: Available except when RDM (random playback) is selected Switching the display Press Track title, Artist name and Album title (MP3 only) are shown on the dis-...
Page 282 3-2. Using the audio system ■ Display →P. 256 ■ Error messages “ERROR”: This indicates a problem either in the CD or inside the player. “CD CHECK”: The CD may be dirty, damaged or inserted up-side down. “NO SUPPORT”: This indicates that MP3/WMA files are not included in the ■...
Page 283 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 284 3-2. Using the audio system ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 285 3-2. Using the audio system ● MP3 and WMA playback When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played.
Page 286: Operating An Ipod
3-2. Using the audio system Operating an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod Open the cover and connect STEP an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on.
Page 287 3-2. Using the audio system Selecting a play mode STEP Press (BROWSE) to select iPod menu mode. STEP Turning clockwise changes the play mode in the fol- lowing order: “Playlists”→“Artists”→“Albums”→“Songs”→“Podcasts”→“Genres” →“Composers”→“Audiobooks” STEP Press to select the desired play mode. ■ Play mode list First Second...
Page 288 3-2. Using the audio system ■ Selecting a list STEP Turn to display the first selection list. STEP Press to select the desired item. Pressing the knob changes to the second selection list. STEP Repeat the same procedure to select the desired item. To return to the previous selection list, press (BACK).
Page 289 3-2. Using the audio system Fast-forwarding and reversing songs To fast-forward or reverse, press and hold ) or Shuffle playback Pressing (RDM) changes modes in the following order: Track shuffle → Album shuffle → Off Repeat play Press (RPT) To cancel, press (RPT) again.
Page 290 3-2. Using the audio system ■ Cord hook A cord can be secured as shown in the illustration. Cords with a diameter of approximately 0.2 in. (5 mm) can be secured. ■ About iPod ● “Made for iPod” and “Made for iPhone” mean that an electronic acces- sory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple per- formance standards.
Page 291 3-2. Using the audio system ■ iPod functions ● When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used. ● Depending on the iPod that is connected to the system, certain functions may not be available.
Page 292 3-2. Using the audio system ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ● Made for • iPod touch (4th generation) •...
Page 293 3-2. Using the audio system NOTICE ■ Cord hook Do not secure items other than cords on the cord hook. Doing so may dam- age the cord hook. ■ To prevent damage to iPod ● Do not leave iPod in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the iPod.
Page 294: Operating A Usb Memory
3-2. Using the audio system Operating a USB memory Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory Open the cover and connect a STEP USB memory. Turn on the power of the USB memory if it is not turned on.
Page 295 3-2. Using the audio system Selecting a folder ■ Selecting folders one at a time To select the desired folder, press ) or ■ Selecting a folder and file from a folder list STEP Press The folder list will be displayed. STEP Turn and press to select a folder and a file.
Page 296 3-2. Using the audio system Scanning files STEP Press The first 10 seconds of all files in the folder will be played. STEP When the desired folder is reached, press again. Fast-forwarding and reversing files To fast-forward or reverse, press and hold ) or Random playback Pressing...
Page 297 3-2. Using the audio system ■ Cord hook →P. 270 ■ USB memory functions ● Depending on the USB memory that is connected to the system, the device itself may not be operable and certain functions may not be avail- able.
Page 298 3-2. Using the audio system ■ USB memory ● Compatible devices USB memory that can be used for MP3 and WMA playback ● Compatible device formats The following device formats can be used: • USB communication formats: USB2.0 FS (12 Mbps) •...
Page 299 3-2. Using the audio system ● MP3 file compatibility • Compatible standards MP3 (MPEG1 AUDIO LAYERIII, MPEG2 AUDIO LAYERIII, MPEG2.5) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz) •...
Page 300 3-2. Using the audio system ● MP3 and WMA playback • When a device containing MP3 or WMA files is connected, all files in the USB memory are checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend that you do not include any files other than MP3 or WMA files or create any unnecessary folders.
Page 301 3-2. Using the audio system NOTICE ■ Cord hook (→P. 273) ■ To prevent damage to USB memory ● Do not leave USB memory in the vehicle. The temperature inside the vehi- cle may become high, resulting in damage to the player. ●...
Page 302: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Displays the current mode Changes the following set- tings • Sound quality and vol- ume balance (→P. 283) The sound quality and bal- ance setting changed to produce the best sound.
Page 303 3-2. Using the audio system Using the audio control function ■ Changing sound quality modes STEP Press STEP Turn to select “Sound Setting”. STEP Press STEP Turn to select the desired mode. “BASS”, “TREBLE”, “FADER”, “BALANCE”, or “ASL” STEP Press ■...
Page 304 3-2. Using the audio system ■ Adjusting the Automatic Sound Levelizer (ASL) When ASL is selected, turning to the right changes the amount of ASL in the order of “LOW”, “MID” and “HIGH”. Turning to the left turns ASL off. ASL automatically adjusts the volume and tone quality according to vehi- cle speed.
Page 305: Using The Aux Port
3-2. Using the audio system Using the AUX port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Open the cover and connect STEP the portable audio device. STEP Press until “AUX”...
Page 306 3-2. Using the audio system Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ and usage may not be possible with audio/nav- igation systems that are not compatible with the steering switches in this vehicle.
Page 307 3-2. Using the audio system Adjusting the volume Press “+” on to increase the volume and “-” to decrease the vol- ume. Hold down “+” or “-” on to continue increasing or decreasing the vol- ume. Silencing a sound Press and hold To cancel, press and hold again.
Page 308 3-2. Using the audio system Selecting a folder or album (MP3 and WMA, USB memory and ® Bluetooth audio) ® STEP Press to select CD, USB memory or Bluetooth audio mode. STEP Press and hold “∧” or “∨” on until you hear a beep. CAUTION ■...
Page 309 ® 3-3. Using the Bluetooth audio system ® Bluetooth audio/phone ■ ® Bluetooth audio ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehi- cle speakers via wireless communication. ®...
Page 310 ® 3-3. Using the Bluetooth audio system ■ Conditions affecting operation ® The Bluetooth audio/phone may not operate normally in the following situa- tions: ● ® The portable player does not support Bluetooth ● The cellular phone is located outside the service area ®...
Page 311 ® 3-3. Using the Bluetooth audio system ■ Compatible models ● ® Bluetooth specifications: Ver. 1.1, or higher (recommended: Ver. 2.1 + EDR or higher) ● Following Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (recom- mended: Ver. 1.2 or higher) •...
Page 312 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio/phone ■ Audio unit ® Bluetooth connection con- dition If “BT” is not displayed, the ® Bluetooth audio/phone cannot be used. Display A message, name, number, etc. is displayed. Lower-case characters and special characters cannot be displayed.
Page 313 ® 3-3. Using the Bluetooth audio system ■ Audio switches →P. 286 ■ Telephone switches Volume On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call ■ Microphone Vehicles without moon roof Vehicles with moon roof...
Page 314 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio/phone for the first time ® Before using the Bluetooth audio/phone, it is necessary to register a ® Bluetooth device in the system. Follow the procedure below to reg- ister (pair) a device: STEP Press...
Page 315 ® 3-3. Using the Bluetooth audio system ® Menu list of the Bluetooth audio/phone First menu Second menu Third menu Operation details Registering a “BT Pairing” ® Bluetooth device Listing the registered “List Phone” cellular phones Listing the registered “List Audio” portable players “Passkey”...
Page 316 ® 3-3. Using the Bluetooth audio system First menu Second menu Third menu Operation details “Add contacts” Adding a new number Registering a speed “Add SD” dial “Delete Call Deleting a number History” stored in the call history “Phonebook” Deleting a number “Delete stored in the contacts”...
Page 317 ® 3-3. Using the Bluetooth audio system ® Operating a Bluetooth enabled portable player Selecting an album, fast-forwarding or reversing Power Volume Repeat play Random playback Selecting items Playback Search playback Selecting a track Playback/Pause Displays text message Selecting an album Press ) or ) to select the desired album.
Page 318 ® 3-3. Using the Bluetooth audio system Scanning tracks STEP Press The first 10 seconds of all tracks in the album will be played. STEP When the desired track is reached, press again. Playing and pausing tracks Press ) to play or pause a track. Fast-forwarding and reversing tracks To fast-forward or reverse, press and hold ) or...
Page 319 ® 3-3. Using the Bluetooth audio system ® ■ Bluetooth audio system functions Depending on the portable player that is connected to the system, certain functions may not be available.
Page 320 ® 3-3. Using the Bluetooth audio system Making a phone call To enter the “PHONE” mode, press the off-hook switch. ■ Making a phone call ● Dialing by selecting a name ● Speed dialing ● Dialing by entering the number ●...
Page 321 ® 3-3. Using the Bluetooth audio system Dialing by selecting a name STEP Select “Phonebook” using STEP Select the desired name using and press the off-hook switch. By pressing (Add S. Dial) and then one of the speed dial but- tons (from ) while the desired name is selected, it can be registered as a speed dial.
Page 322 ® 3-3. Using the Bluetooth audio system Dialing from call histories STEP Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls” using STEP Select the desired number using and press the off- hook switch. The following operations can be performed: ●...
Page 323 ® 3-3. Using the Bluetooth audio system Operations during a call ● Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the fol- lowing methods: a.
Page 324 ® 3-3. Using the Bluetooth audio system Adjusting the ringtone volume when receiving a call Change the ringtone volume using To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. ■ When talking on the phone ● Do not talk simultaneously with the other party. ●...
Page 325 ® 3-3. Using the Bluetooth audio system Using the “SET UP” menu (“Bluetooth” menu) ® Registering a Bluetooth device in the system allows the system to function. The following functions can be used for registered devices: ■ Functions and operation procedures STEP Press and select “Bluetooth”...
Page 326 ® 3-3. Using the Bluetooth audio system Registering a portable player Select “Pairing” using , and perform the procedure for register- ing a portable player. (→P. 294) Listing the registered cellular phones Select “List Phone” using . The list of registered cellular phones will be displayed.
Page 327 ® 3-3. Using the Bluetooth audio system Listing the registered portable players Select “List Audio” using . The list of registered portable play- ers will be displayed. ● Connecting the registered portable player to the audio system STEP Select the name of the portable player to be connected using STEP Select “Select”...
Page 328 ® 3-3. Using the Bluetooth audio system Changing the passkey STEP Select “Passkey” using STEP Select a 4 to 8-digit passkey using Input the number 1 digit at a time. STEP When the entire number to be registered as a passkey has been input, press again.
Page 329 ® 3-3. Using the Bluetooth audio system Displaying the device status Select “Bluetooth info” using ● Displaying the device name Select “Device Name” using ● Displaying the device address Select “Device Address” using Setting the automatic connection confirmation display to on or off If the “Display Setting”...
Page 330 ® 3-3. Using the Bluetooth audio system Initialization Select “Initialize” using ● Initializing the sound settings Select “Sound setting” using and press (YES). For details about sound settings: →P. 311 ● Initializing the device information Select “Car Device Info” using and press (YES).
Page 331 ® 3-3. Using the Bluetooth audio system Using the “SET UP” menu (“Phone” menu) ■ Functions and operation procedures To enter the menu of each function, press and follow the steps below using ● Adding a new phone number 1. “Phone” → 2. “Phonebook” → 3. “Add contacts” ●...
Page 332 ® 3-3. Using the Bluetooth audio system Adding a new phone number Select “Add contacts” using ● Transferring all contacts from the cellular phone Select “Overwrite all contacts” using and press (YES). ● Transferring one contact from the cellular phone Select “Add one contact”...
Page 333 ® 3-3. Using the Bluetooth audio system Deleting call histories Select “Delete Call History” using ● Deleting outgoing call history STEP Select “Outgoing Calls” using STEP Select the desired phone number using and press (YES). To delete all outgoing call history data, press (ALL) and then press (YES).
Page 334 ® 3-3. Using the Bluetooth audio system ● Deleting missed call history STEP Select “Missed Calls” using STEP Select the desired phone number using and press (YES). To delete all missed call history data, press (ALL) and then press (YES). ●...
Page 335 ® 3-3. Using the Bluetooth audio system Deleting a registered phone number STEP Select “Delete contacts” using STEP Select the desired phone number using and press (YES). To delete all of the registered phone numbers, select “All delete” using and press (YES).
Page 336 ® 3-3. Using the Bluetooth audio system Setting ringtone volume STEP Select “Ringtone Volume” using STEP Change the ringtone volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Setting ringtone STEP Select “Ringtone” using STEP Using , select a ringtone (1 - 3).
Page 337 ® 3-3. Using the Bluetooth audio system ■ Phone number Up to 1000 names can be stored. ■ Call history Up to 10 numbers can be stored in each of the outgoing, incoming and missed call history memories. ■ Limitation of number of digits A phone number that exceeds 24 digits cannot be registered.
Page 338 3-4. Using the interior lights Interior lights list Interior lights/personal lights (→P. 319) Luggage compartment light...
Page 339 3-4. Using the interior lights Interior lights/personal lights Interior lights/personal lights Interior lights Turns the lights off Turns the lights on/off linked to door positions Turns the lights on Personal lights Turns the lights on Turns the lights off...
Page 340 “POWER” switch is off, the lights will go off automatically after 20 minutes. ■ Customization that can be configured at Toyota dealer Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features →P. 516) NOTICE ■...
Page 341 3-5. Using the storage features List of storage features Bottle holders Auxiliary boxes (if equipped) Glove box Cup holders Console box (if equipped) CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●...
Page 342 3-5. Using the storage features Glove box and console box Glove box Pull up the lever to open the glove box. CAUTION ■ Caution while driving Keep the glove box closed. In the event of sudden braking, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.
Page 343 3-5. Using the storage features Console box Remove the lid at the bottom of the console box. Small items can be stored in this space. ■ When using the console box lid as an armrest The lid can be slid forward or backwards. CAUTION ■...
Page 344 3-5. Using the storage features Auxiliary boxes Auxiliary boxes Type A Type B Type C...
Page 345 3-5. Using the storage features Auxiliary boxes Type D Type E (if equipped) CAUTION ■ Items unsuitable for the box Do not place items that easily roll over or extend past the box’s rim. The items may be thrown out of the tray, causing an accident.
Page 346 3-5. Using the storage features Cup holders Cup holders Front Rear (type A) Rear (type B) Pull down the cup holder lid.
Page 347 3-5. Using the storage features Cup holders and bottle holders CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or beverage cans in the cup holders. Items in the cup holders may be thrown out of the holders in the event of an accident or sudden braking, causing injury.
Page 348 3-5. Using the storage features Bottle holders NOTICE ■ Items that should not be stowed in the bottle holders Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.
Page 349 3-6. Other interior features Sun visors To set the visor in the for- ward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side.
Page 350 3-6. Other interior features Vanity mirrors Slide the cover to open.
Page 351 3-6. Other interior features Outside temperature display The temperature display shows temperatures within the range of -40°F (-40°C) and 122°F (50°C). The outside temperature dis- play of the “Drive Information” screen can be displayed by pressing the “DISP” switch. (→P. 189) ■...
Page 352 When the vehicle is stopped, or moving at low speeds (less than 16 mph [25 km/h]) ● When the outside temperature has changed suddenly (at the entrance/ exit of a garage, tunnel, etc.) When “− −” or “E” is displayed ■ The system may be malfunctioning. Take your vehicle to your Toyota dealer.
Page 353 3-6. Other interior features Power outlet The power outlet can be used for 12 V accessories that run on less than 10 A. ■ The power outlet can be used when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “POWER”...
Page 354 3-6. Other interior features ∗ Seat heaters Turns on the front left seat heater Turns on the front right seat heater The indicator light comes on. Push the switch once again to turn off the seat heater. ■ The seat heaters can be used when The “POWER”...
Page 355 3-6. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically chal- lenged •...
Page 356 3-6. Other interior features ∗ Coat hooks CAUTION ■ Items that cannot be hung on the coat hook Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury.
Page 357 3-6. Other interior features Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks STEP (clips) into the floor mat eye- lets.
Page 358 When installing the driver's floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver's seat. ●...
Page 359 3-6. Other interior features ∗ Luggage cover ■ Removing the luggage cover Unhook the cords. STEP Push the luggage cover for- STEP ward disengage anchors. Remove the luggage cover. STEP ∗ : If equipped...
Page 360 3-6. Other interior features ■ Installing the luggage cover Place the luggage cover on STEP the anchors. Push the luggage cover until a STEP click sound is heard. STEP Hook the cords.
Page 361 4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 362 4-1. Maintenance and care ■ When using a car wash (vehicles with a smart key system) If the door handle becomes wet while the electronic key is within the effec- tive range, the door may lock and unlock repeatedly. In that case, follow the following correction procedures to wash the vehicle: ●...
Page 363 4-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
Page 364 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 365 4-1. Maintenance and care CAUTION ■ Water in the vehicle ● Do not splash or spill liquid in the vehicle, such as on the floor, in the hybrid battery (traction battery) air vents, and in the luggage compartment. Doing so may cause the hybrid battery, electrical components, etc. to mal- function or catch fire.
Page 366 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 367 It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 368 Continue to press and hold the button until the trip meter displays “000000”. ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 369 4-2. Maintenance CAUTION ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. ■ Handling of the 12-volt battery ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
Page 370 Booklet” “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Check points Is the brake fluid at the correct...
Page 371 4-2. Maintenance Vehicle interior Items Check points 12-volt battery Check the connections. (→P. 375) • The accelerator pedal should Accelerator pedal move smoothly (without uneven pedal effort or catching). • Does the brake pedal move smoothly? • Does the brake pedal have appro- priate clearance from the floor? Brake pedal (→P.
Page 372 4-2. Maintenance Items Check points • Does the parking brake lever operate normally? Parking brake • When parked on a slope and the parking brake is on, is the vehicle securely stopped? • Do the seat belts operate smoothly? Seat belts •...
Page 373 4-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? • Does the engine hood lock sys- Engine hood tem work properly? • There should not be any signs of Fluid leaks fluid leakage after the vehicle has been parked.
Page 374 If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■...
Page 375 Brake fluid level (→P. 371) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology For the U.S.A.:...
Page 376 4-3. Do-it-yourself maintenance Items Parts and tools • “Toyota Genuine Motor Oil” or equivalent Engine oil level (→P. 365) • Rag or paper towel • Funnel (used only for adding engine oil) • Fuse with same amperage rating Fuses (→P. 400) as original •...
Page 377 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions: ■ When working on the engine compartment ● Vehicles without a smart key system: Make sure that the engine switch is in the “LOCK”...
Page 378 4-3. Do-it-yourself maintenance CAUTION ■ Safety glasses Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting in your eyes. NOTICE ■ If you remove the air cleaner filter Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air.
Page 379 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release STEP lever. The hood will pop up slightly. Pull up the auxiliary catch STEP lever and lift the hood. Hold the hood open by insert- STEP ing the supporting rod into the...
Page 380 4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 381 4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. Front Rear...
Page 382 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following precautions to reduce the possibility of death or serious injury: ● Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 383 4-3. Do-it-yourself maintenance Engine compartment Fuse boxes (→P. 400) Engine/power control unit coolant radiator (→P. 371) Engine oil filler cap (→P. 366) Electric cooling fan Engine coolant radiator cap Condenser (→P. 371) Power control unit Engine oil level dipstick coolant reservoir (→P. 369) (→P.
Page 384 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP Park the vehicle on level ground. After warming up the engine and turning off the hybrid system, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 385 4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 386 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 387 4-3. Do-it-yourself maintenance NOTICE ■ To prevent serious engine damage Check the oil level on a regular basis. ■ When replacing the engine oil ● Be careful not to spill engine oil on the vehicle components. ● Avoid overfilling, or the engine could be damaged. ●...
Page 388 4-3. Do-it-yourself maintenance Coolant Engine coolant reservoir The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. Reservoir cap “FULL” line “LOW” line If the level is on or below the “LOW”...
Page 389 If the coolant level drops within a short time of replenishing Visually check the radiators, hoses, engine/power control unit coolant reser- voir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling systems. CAUTION ■...
Page 390 Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. CAUTION ■ When the hybrid system is hot Do not touch the radiators or condenser as they may be hot and cause seri- ous injuries, such as burns.
Page 391 4-3. Do-it-yourself maintenance ■ Adding fluid Make sure to check the fluid type and prepare the necessary item. Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Item Clean funnel Slide and lift up the rubber strip STEP and clips to partly remove it as shown.
Page 392 4-3. Do-it-yourself maintenance ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid. CAUTION ■ When filling the reservoir Take care as brake fluid can harm your hands and eyes and damage painted surfaces.
Page 393 4-3. Do-it-yourself maintenance Washer fluid If the amount of washer fluid is insufficient, add washer fluid. CAUTION ■ When adding washer fluid Add washer fluid after the hybrid system has been stopped and cooled down sufficiently. Washer fluid contains alcohol and may catch fire if spilled inside a hot engine compartment.
Page 394 4-3. Do-it-yourself maintenance 12-volt battery ■ Location The 12-volt battery is located under the rear right seat. ■ Removing the 12-volt battery cover Remove the 12-volt battery cover after removing the clips.
Page 395 4-3. Do-it-yourself maintenance ■ Exterior Make sure that the 12-volt battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp ■ Installing the 12-volt battery cover Install the 12-volt battery cover with the clips.
Page 396 12-volt battery. Take extra care when connecting the 12-volt battery if the “POWER” switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer.
Page 397 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the 12-volt battery The 12-volt battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the 12-volt battery: ●...
Page 398 Use a 12-volt battery designed for this vehicle. Failure to do so may cause gas (hydrogen) to enter the passenger compartment, causing a fire or explo- sion. For replacement of the 12-volt battery, contact your Toyota dealer. NOTICE ■ When recharging the 12-volt battery Never recharge the 12-volt battery while the hybrid system is operating.
Page 399 ■ Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom- mends that tire rotation is Front carried out at the same inter- val as tire inspection. Do not fail to initialize the tire...
Page 400 Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (→P. 382) ■ The tire pressure warning system must be initialized in the fol- lowing circumstances: ●...
Page 401 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer.
Page 402 4-3. Do-it-yourself maintenance ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly. After driving for about 20 minutes, the tire pressure warning light blinks for 1 minute and stays on to indicate a system malfunction.
Page 403 4-3. Do-it-yourself maintenance ■ Tire types ● Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 404 Initialization can be completed in a few minutes. However, in the follow- ing cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ●...
Page 405 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 406 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 407 4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size are displayed on the tire and loading information label. (→P. 498)
Page 408 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge STEP Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the gauge gradations. STEP If the tire inflation pressure is not at the recommended level, adjust the pressure.
Page 409 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent inflating, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 410 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury: ● Excessive wear ● Uneven wear ●...
Page 411 ● Bent wheels that have been straightened ■ Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 412 4-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your vehicle are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advance warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, tire pressure warning valves and trans- mitters must be installed.
Page 413 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 414 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Replacement method STEP Vehicles without a smart key system Turn the engine switch to the “LOCK” position. Vehicles with a smart key system Turn the “POWER”...
Page 415 4-3. Do-it-yourself maintenance Remove the filter cover. STEP Remove the air conditioning STEP filter and replace it with a new one. The “↑UP” mark shown on the filter should be pointing up. ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule.
Page 416 4-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. ■ You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR2016 (vehicles without a smart key sys- tem), or CR2032 (vehicles with a smart key system) ■...
Page 417 4-3. Do-it-yourself maintenance ■ Replacing the battery (vehicles with a smart key system) Take out the mechanical key. STEP Remove the cover. STEP To prevent damage to the key, cover the tip of the screwdriver with a rag. Remove the depleted battery STEP using a small flathead screw- driver.
Page 418 Use a CR2016 (vehicles without a smart key system) or CR2032 (vehi- cles with a smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appli- ance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manufacturer.
Page 419 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP Vehicles without a smart key system Turn the engine switch off. Vehicles with a smart key system Turn the “POWER”...
Page 420 4-3. Do-it-yourself maintenance Under the instrument panel Remove the lid. STEP After a system failure, see “Fuse layout and amperage rat- ings” (→P. 404) for details about which fuse to check. STEP Remove the fuse with the pull-out tool. Only type A fuse can be removed using the pullout tool.
Page 421 4-3. Do-it-yourself maintenance STEP Check if the fuse is blown. Type A Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating. The amper- age rating can be found on the fuse box lid. Type B Normal fuse Blown fuse...
Page 422 Type D Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating. The amper- age rating can be found on the fuse box lid. Type E Normal fuse Blown fuse Contact your Toyota dealer.
Page 423 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings Engine compartment (type A fuse box) Fuse Ampere Circuit Multiport fuel injection system/ EFI-MAIN 20 A sequential multiport fuel injection system, EFI NO.2 HORN 10 A Horn 30 A IG2 NO.2, METER, IGN SPARE 7.5 A Spare fuse...
Page 424 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiport fuel injection system/ sequential multiport fuel injection system, steering switches, brake IG2 NO.2 10 A system, starter system, smart key system, occupant classification system, SRS airbag system Audio system, vehicle control and operation data recording, main DOME 15 A body ECU, personal lights, lug-...
Page 425 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Air conditioning system, gauge and meters, occupant classifica- ECU-B NO.2 7.5 A tion system, tire pressure warning system, starter system, smart key system, power door lock system 7.5 A Starter system STRG LOCK 20 A Starter system ABS NO.2 10 A...
Page 426 4-3. Do-it-yourself maintenance Engine compartment (type B fuse box) Fuse Ampere Circuit DC/DC 100 A Hybrid system ABS MTR NO.2 30 A Brake system 40 A Air conditioning system 50 A Electric power steering system...
Page 427 4-3. Do-it-yourself maintenance Under the driver’s side instrument panel Fuse Ampere Circuit Parking lights, side marker lights, TAIL 10 A tail lights, license plate lights, front fog lights, gauge and meters PANEL Instrument panel lights DOOR R/R 20 A Rear power window (right side) DOOR P 20 A Front power window (right side)
Page 428 (→P. 411) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■ If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
Page 429 Never use a fuse of a higher amperage rating than that indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire.
Page 430 You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. As there is a danger that components may be damaged, we recommend that replacement is carried out by your Toyota dealer. ■ Preparing for light bulb replacement Check the wattage of the light bulb to be replaced.
Page 431 4-3. Do-it-yourself maintenance ■ Rear bulb locations Rear turn signal lights Tail and rear side marker lights License plate lights Back-up lights Replacing light bulbs ■ Headlights and daytime running lights Turn the bulb base counterclock- STEP wise. High beam and daytime run- ning lights (inside) Low beam (outside)
Page 432 4-3. Do-it-yourself maintenance Unplug connector while STEP pushing the lock release. High beam and daytime run- ning lights Low beam Replace the light bulb, and install STEP the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base.
Page 433 4-3. Do-it-yourself maintenance Partly remove the fender liner. STEP Unplug connector while STEP pushing the lock release. Turn the bulb base counterclock- STEP wise. Install a new bulb. STEP Align the 3 tabs on the light bulb with the mounting, and insert.
Page 434 4-3. Do-it-yourself maintenance Turn and secure the bulb. Install STEP the connector. Shake the bulb base gently to check that it is not loose, turn the front fog light on once and visu- ally confirm that no light is leaking through the mounting.
Page 435 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP STEP When installing, reverse the steps listed. ■ Front side marker lights Turn the steering wheel in the STEP opposite direction of the light to be replaced.
Page 436 4-3. Do-it-yourself maintenance Remove the clips. STEP Partly remove the fender liner. STEP Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 437 4-3. Do-it-yourself maintenance STEP When installing the light bulb and bulb base, reverse the steps listed. Installing the clips. STEP ■ Front turn signal lights STEP STEP Partly remove the fender liner as described in STEP of “Front fog lights”. (→P. 413) Turn the bulb base counterclock- STEP wise.
Page 438 4-3. Do-it-yourself maintenance ■ Rear turn signal lights, tail and rear side marker lights, and back-up lights Open the back door and remove STEP the bolts. Pull the lamp assembly straight back to disengage the clip and 2 pins. Where the clip attaches Turn the bulb base counterclock- STEP wise.
Page 439 4-3. Do-it-yourself maintenance Remove the light bulb. STEP Rear turn signal light Tail and rear side marker light Back-up light STEP When installing, reverse the steps listed. ■ License plate light Remove the cover. STEP Insert a properly sized screw- driver into the hole of the cover, and pry off the cover as shown in the illustration.
Page 440 ■ LED light bulbs The stop lights and high mounted stoplight consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ■ Condensation build-up on the inside of the lens Contact your Toyota dealer for more information in the following situations.
Page 441 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. Hold the bulb by the plastic or metal portion.
Page 442 5-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 443 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 444 5-1. Essential information Installing towing eyelet Push the eyelet cover and then STEP open it. Insert the towing eyelet into the STEP hole and tighten partially by hand. Tighten down the towing eyelet STEP securely using a wheel nut wrench.
Page 445 5-1. Essential information Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck From the front Release the parking brake. From the rear Use a towing dolly under the front wheels.
Page 446 5-1. Essential information Using a flatbed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged. ■ Before emergency towing STEP Vehicles without a smart key system...
Page 447 5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelet and the cables or chains. Always be cautious of the surroundings and other vehicles while towing. ●...
Page 448 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 449 If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer. Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
Page 450 Charging system warning light Indicates a malfunction in the vehicle's charging sys- Have the vehicle inspected by your Toyota dealer immediately. Failure to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident.
Page 451 5-2. Steps to take in an emergency Warning light Warning light/Details Electric power steering system warning light (warn- ing buzzer) Indicates a malfunction in the EPS (Electric Power Steering) system Slip indicator light Indicates a malfunction in: • Vehicle stability control; (Comes on) •...
Page 452 • Flat tire (→P. 457) inflation pressure is adjusted, have the system checked by your Toyota dealer. When the light comes on after blinking for 1 minute: Have the system Malfunction in the tire checked by your Toyota pressure warning system dealer. (→P. 437)
Page 453 5-2. Steps to take in an emergency : Driver's and front passenger's seat belt buzzer: The driver's and front passenger's seat belt buzzer sounds to alert the driver and front passenger that his or her seat belt is not fastened. Once the engine switch is turned to the “ON”...
Page 454 If the fuel tank cap is loose, tighten it securely. The malfunction indica- tor lamp will go off after several trips. If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible. ■ When the tire pressure warning light comes on Check the tire inflation pressure and adjust to the appropriate level.
Page 455 If there is a lot of snow or ice on the vehicle, particularly around the wheels or wheel housings ● If non-genuine Toyota wheels are used (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
Page 456 Check the tires. If a tire is flat, change it with the spare tire and have the flat tire repaired by the nearest Toyota dealer. ● Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes.
Page 457 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 458 5-2. Steps to take in an emergency CAUTION TPMS (tire pressure warning system) malfunctions may occur for a vari- ety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly.
Page 459 If any of the warning lights comes on again after the following actions have been performed, contact your Toyota dealer.
Page 460 Stop the vehicle immediately. The following warning indicates the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning message Details Indicates a malfunction in the hybrid system A buzzer sounds in accordance with the warning message that is displayed.
Page 461 A buzzer sounds and a warning message is shown on the multi-infor- mation display. Failure to investigate the cause of the following warn- ings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning message Details •...
Page 462 5-2. Steps to take in an emergency Follow the correction procedures. A buzzer sounds and a warning message is shown on the multi-infor- mation display. After taking the specified steps to correct the sus- pected problem, check that the warning message goes off. Warning message Details Correction procedure...
Page 463 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the moon roof is not fully closed (with the “POWER” switch off Close the moon roof. and the driver's door (Flashes) is open) A buzzer also sounds. (If equipped) Indicates that the parking brake is still...
Page 464 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that all maintenance is required to corre- spond to the driven distance on the main- Perform the necessary tenance schedule maintenance. Comes on approxi- Please reset the main- mately 5000 miles tenance data after the (8000 km) after the...
Page 465 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the hybrid battery (trac- tion battery) power Shift the shift lever to P has dropped because and restart the hybrid a long period of time system when starting has elapsed after the vehicle.
Page 466 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the EV drive mode is not available A buzzer also sounds. The reason the EV drive mode is not available (the vehicle Use the EV drive mode is idling, battery when it becomes avail- charge is low, speed is...
Page 467 5-2. Steps to take in an emergency Have the malfunction repaired immediately. (vehicles with a smart key system) After taking the specified steps to correct the suspected problem, check that the warning message and light go off. Correction Interior Exterior Warning message Details procedure...
Page 468 5-2. Steps to take in an emergency Correction Interior Exterior Warning message Details procedure buzzer buzzer The electronic key was carried outside the vehicle and the Turn the driver’s door “POWER” was opened switch off or and closed bring the elec- while the shift tronic key back lever was in P...
Page 469 5-2. Steps to take in an emergency Correction Interior Exterior Warning message Details procedure buzzer buzzer An attempt was made to lock the doors using the entry func- Turn the tion after the “POWER” Continuous electronic key switch off and Once (For 5 seconds) was carried out-...
Page 470 5-2. Steps to take in an emergency Correction Interior Exterior Warning message Details procedure buzzer buzzer The driver’s door was opened while a shift lever posi- tion other than Shift the shift ⎯ Continuous P was selected lever to P. without turning (Flashes) off the...
Page 471 5-2. Steps to take in an emergency Correction Interior Exterior Warning message Details procedure buzzer buzzer An attempt was made to lock the doors using the smart key system while the electronic key was still inside the vehi- cle. An attempt was Retrieve the made to lock electronic key...
Page 472 5-2. Steps to take in an emergency Correction Interior Exterior Warning message Details procedure buzzer buzzer • The electronic key could not be detected when the “POWER” switch was pressed after the doors were Touch the elec- unlocked with tronic key to the the mechanical “POWER”...
Page 473 5-2. Steps to take in an emergency Correction Interior Exterior Warning message Details procedure buzzer buzzer Replace the The electronic electronic key ⎯ key has a low Once battery. battery. (→P. 397) The driver's door was opened and closed with the “POWER”...
Page 474 5-2. Steps to take in an emergency Correction Interior Exterior Warning message Details procedure buzzer buzzer The steering Press the lock could not “POWER” be released switch while within 3 sec- depressing the ⎯ Once onds of the brake pedal and “POWER”...
Page 475 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare tire provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ●...
Page 476 5-2. Steps to take in an emergency Taking out the jack Move the driver seat to the front STEP most position. Push the tabs in and remove the STEP cover by pulling it towards you. For tightening STEP For loosening...
Page 477 5-2. Steps to take in an emergency Taking out the compact spare tire Remove the luggage floor cover STEP by lifting up the points indicated by the arrows. Remove the spare wheel cush- STEP ions, then loosen the center fas- tener that secures the spare tire.
Page 478 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP Wheel chock Flat tire positions Behind the Left- rear right- hand hand side side tire Front Behind the Right- rear left- hand hand side side tire In front of Left-...
Page 479 5-2. Steps to take in an emergency Slightly loosen the wheel nuts STEP (one turn). Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. Raise the vehicle until the tire is STEP slightly raised off the ground.
Page 480 5-2. Steps to take in an emergency Installing the compact spare tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 481 5-2. Steps to take in an emergency Lower the vehicle. STEP Firmly tighten each wheel nut STEP two or three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) STEP Stow the tire jack and all tools. Stow the flat tire in the luggage STEP compartment as shown in the...
Page 482 5-2. Steps to take in an emergency ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily, and only in an emergency. ●...
Page 483 5-2. Steps to take in an emergency CAUTION ■ When using the compact spare tire ● Remember that the compact spare tire provided is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. ●...
Page 484 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 485 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the...
Page 486 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and...
Page 487 5-2. Steps to take in an emergency If the hybrid system will not start Reasons for the hybrid system not starting vary depending on the situation. Check the following and perform the appropriate proce- dure: ■ The hybrid system will not start even though the correct starting procedure is being followed.
Page 488 ● One or both of the 12-volt battery terminals may be discon- nected. ● The 12-volt battery may be discharged. (→P. 475) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart key system)
Page 489 (a system to pre- vent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to...
Page 490 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicles without a smart key system, bring a master key and the key number stamped on the key number plate. For vehicles with a smart key sys- tem, bring the other key and the key number stamped on the key number plate.
Page 491 5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with a smart key system) If communication between the electronic key and vehicle is inter- rupted (→P. 55) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote con- trol cannot be used.
Page 492 5-2. Steps to take in an emergency Starting the hybrid system STEP Ensure that the shift lever is in P and depress the brake pedal. Touch the Toyota emblem side of STEP electronic “POWER” switch. When electronic detected, a buzzer sounds and the “POWER”...
Page 493 The following procedures may be used to start the hybrid system if the vehicle’s 12-volt battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your vehicle by follow- ing the steps below.
Page 494 ON mode. STEP Make sure the “READY” indicator comes on. If the indicator does not come on, contact your Toyota dealer. STEP Once the hybrid system has started, remove the jumper cables in the exact reverse order from which they were con- nected.
Page 495 5-2. Steps to take in an emergency ■ Starting the hybrid system when the 12-volt battery is discharged The hybrid system cannot be started by push-starting. ■ To prevent 12-volt battery discharge ● Turn off the headlights and the audio system while the hybrid system is off.
Page 496 12-volt battery. ■ After recharging the 12-volt battery Have the 12-volt battery inspected at your Toyota dealer as soon as possi- ble. If the 12-volt battery is deteriorating, continued use may cause the 12-volt battery to emit a malodorous gas, which may be detrimental to the health of passengers.
Page 497 5-2. Steps to take in an emergency CAUTION ■ 12-volt battery precautions The 12-volt battery contains poisonous and corrosive acidic electrolyte, while related parts contain lead and lead compounds. Observe the following precautions when handling the 12-volt battery: ● When working with the 12-volt battery, always wear safety glasses and take care not to allow any battery fluids (acid) to come into contact with skin, clothing or the vehicle body.
Page 498 STEP Check to see if the cooling fans are operating. If the fans are operating: Wait until disappears and then stop the hybrid system. If the fans are not operating: Stop the hybrid system immediately and call your Toyota dealer.
Page 499 Add engine coolant if necessary. STEP Water can be used in an emer- gency if engine coolant is unavail- able. (→P. 494) Have the vehicle inspected at the nearest Toyota dealer as soon as possible.
Page 500 Add power control unit coolant if STEP necessary. Water can be used in an emer- gency if power control unit cool- ant is unavailable. (→P. 494) Have the vehicle inspected at the nearest Toyota dealer as soon as possible.
Page 501 5-2. Steps to take in an emergency ■ Overheating The following symptoms may occur when your vehicle is overheating: ● Hybrid system output decreases. ● Steam comes out from the engine area. CAUTION ■ To prevent an accident or injury when inspecting under the hood of your vehicle ●...
Page 502 ■ To prevent damage to the cooling system Observe the following precautions: ● Avoid contaminating the coolant with foreign matter (such as sand or dust etc.). ● When using coolant additives, use genuine Toyota products or equivalent.
Page 503 5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: STEP Shift the shift lever to P and set the parking brake. Stop the hybrid system.
Page 504 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: STEP Steadily step on the brake pedal with both feet and firmly...
Page 505 5-2. Steps to take in an emergency Vehicles with a smart key sys- STEP tem: To stop the hybrid sys- tem, press and hold the “POWER” switch for 3 consec- utive seconds or more, or press it briefly 3 times or more Press and hold for 3 seconds or more, in succession.
Page 506 5-2. Steps to take in an emergency...
Page 507 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 157.3 in. (3995 mm) Overall width 66.7 in. (1695 mm) Without moon roof 56.9 in. (1445 mm) Overall height With moon roof 57.7 in. (1465 mm) Wheelbase 100.4 in.
Page 508 ■ Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped under the front passenger’s seat.
Page 509 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. Engine Model 1NZ-FXE Type 4-cylinder in line, 4-cycle, gasoline 2.95 × 3.33 in. (75.0 × 84.7 mm) Bore and stroke Displacement 91.3 cu.in. (1497 cm Intake: 0.006 ⎯...
Page 510 5 minutes, and check the oil level on the dipstick. ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity.
Page 511 5.6 qt. (5.3 L, 4.7 Imp. qt.) Power control unit 1.7 qt. (1.6 L, 1.4 Imp. qt.) Use either of the following: • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glycol- Coolant type based non-silicate, non-amine, non-nitrite,...
Page 512 6-1. Specifications Ignition system Spark plug Make DENSO FK16R-A8 0.03 in. (0.8 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust the spark plug gap. Electrical system 12-volt battery Open voltage* at 68°F (20°C): Fully charged 12.5 V or over 11.0 ⎯...
Page 513 : The fluid capacity is a reference quantity. If replacement is necessary, con- tact your Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage to the vehicle’s transmission.
Page 514 6-1. Specifications Brakes Pedal clearance 2.8 in. (70 mm) Min. 0.04 ⎯ 0.24 in. (1.0 ⎯ 6.0 mm) Pedal free play Brake pad wear limit 0.04 in. (1.0 mm) Brake lining wear limit 0.04 in. (1.0 mm) 8 ⎯ 11 clicks Parking brake lever travel Fluid type SAE J1703 or FMVSS No.116 DOT 3...
Page 515 6-1. Specifications Tires and wheels 15-inch tires P175/65R15 84H, T125/70D16 96M Tire size (spare) Front: 35 psi (240 kPa, 2.4 kgf/cm or bar) Rear: Tire inflation pressure 33 psi (230 kPa, 2.3 kgf/cm or bar) (recommended cold Spare: tire inflation pressure) 60 psi (420 kPa, 4.2 kgf/cm or bar) Never exceed the maximum cold tire infla-...
Page 516 6-1. Specifications Light bulbs Light Bulbs Bulb No Type Headlights Low beam 9704 High beam 9005 ⎯ Parking lights ⎯ Front turn signal lights ⎯ Front fog lights* Tail and rear side marker Exterior ⎯ lights ⎯ License plate lights ⎯...
Page 517 In very few cases, driveability problems may be caused by the brand of gas- oline you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer. ■...
Page 518 Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methyl- cyclopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
Page 519 6-1. Specifications ■ If your engine knocks ● Consult your Toyota dealer. ● You may occasionally notice light knocking for a short time while acceler- ating or driving uphill. This is normal and there is no need for concern. NOTICE ■...
Page 520 6-1. Specifications Tire information Typical tire symbols Full-size tire Compact spare tire...
Page 521 6-1. Specifications Tire size (→P. 506) TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube main- tains the air pressure.
Page 522 6-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol* Tire Identification Number (TIN) Tire manufacturer's identifica- tion mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal...
Page 523 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
Page 524 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 525 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100.
Page 526 6-1. Specifications ■ Temperature A, B, C The temperature grades are A (the highest), B, and C, represent- ing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a speci- fied indoor laboratory test wheel.
Page 527 6-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not sure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which a Maximum inflation...
Page 528 6-1. Specifications Tire related term Meaning The combined weight of installed regular pro- duction options weighing over 5 lb. (2.3 kg) in excess of the standard items which they Production options replace, not previously considered in curb weight weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim A metal support for a tire or a tire and tube...
Page 529 6-1. Specifications Tire related term Meaning A breakdown of the bond between components Bead separation in the bead A pneumatic tire in which the ply cords that extend to the beads are laid at alternate angles Bias ply tire substantially less than 90 degrees to the cen- terline of the tread The tire structure, except tread and sidewall Carcass...
Page 530 6-1. Specifications Tire related term Meaning (a) The sidewall that contains a whitewall, bears white lettering, or bears manufac- turer, brand, and/or model name molding that is higher or deeper than the same Intended outboard molding on the other sidewall of the tire, or sidewall (b) The outward facing sidewall of an asymmet- rical tire that has a particular side that must...
Page 531 6-1. Specifications Tire related term Meaning A parting of rubber compound between adja- Ply separation cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load A pneumatic tire in which the ply cords that...
Page 532 6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indicators designed to give a visual indication of the...
Page 533 Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Customizable Features Vehicles with a Display Audio system: Settings that can be...
Page 534 6-2. Customization Default set- Customized Item Function ting setting Operation sig- — (Emergency flashers) Operation sig- — (Buzzer) Operation Level 7 Off to level 7 buzzer volume Smart key Time elapsed system before auto- 30 seconds and wire- matic door lock less remote function is acti- 60 seconds...
Page 535 6-2. Customization Default set- Customized Item Function ting setting Smart key sys- — Smart key Number of per- system → P. 47) missible times Twice Unlimited — of continuous smart lock Wireless — remote control Driver's door Wireless unlocked in remote All doors Unlocking...
Page 536 6-2. Customization Default set- Customized Item Function ting setting Driver's door unlocked in All doors Unlocking one step, all unlocked in — using a key doors one step. unlocked in two steps Speed-detect- ing automatic door lock func- tion* Door lock Opening →...
Page 537 6-2. Customization Default set- Customized Item Function ting setting Time elapsed 7.5 seconds — before lights 15 seconds 30 seconds — turn off Operation when the doors — are unlocked Operation after the engine switch is turned — to the “LOCK” Illumination position →...
Page 538 6-2. Customization Default set- Customized Item Function ting setting Automatic air condi- Air condition- tioning sys- ing control of — Eco drive mode → P. 236) : If equipped : Vehicles without a smart key system : Vehicles with a smart key system...
Page 539 6-2. Customization Items to initialize The following items must be initialized for normal system operation after such cases as the 12-volt battery being reconnected, or mainte- nance being performed on the vehicle: Item When to initialize Reference Maintenance data After the maintenance is performed P.
Page 540 If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 541 Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 542 ATTENTION ■ Lorsque vous utilisez ou rangez la ceinture de sécurité du siège central arrière ● N’utilisez pas la ceinture de sécurité du siège arrière central lorsque l’une des boucles est détachée. Si vous n’attachez qu’une des boucles, il y a risque de blessures graves voire mortelles en cas de freinage brusque ou de collision.
Page 543 SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English. Airbags SRS frontaux Airbag conducteur/airbag passager avant SRS Participent à...
Page 544 Airbags SRS latéraux et rideau Airbags SRS latéraux avant Participent à la protection du haut du corps des occupants assis aux places avant. Airbags SRS rideau Participent principalement à la protection de la tête des occupants assis aux places extérieures. Autres airbags SRS Airbags SRS de coussin de siège Participent à...
Page 545 Composition du système d’airbag SRS Airbags rideau Capteurs d'impact latéral (avant) Témoin d’alerte SRS et témoins indicateurs “AIR Prétensionneurs BAG ON” et “AIR BAG ceinture sécurité OFF” limiteurs d’effort Airbags latéraux Capteurs d'impact latéral Capteurs d'impact latéral (porte avant) (arrière) Airbag genoux Airbag coussin de siège du...
Page 546 Votre véhicule est équipé de SACS DE SÉCURITÉ GONFLABLES INTELLIGENTS (ADVANCED AIRBAGS) conçus selon les normes de sécurité américaines applicables aux véhicules à moteur (FMVSS208). Le boîtier électronique (ECU) des sacs de sécurité gonflables régule le déploiement de ces derniers sur la base des informations qu'il reçoit des capteurs, etc., indiqués ci-dessus dans le schéma illustrant...
Page 547 ATTENTION ■ Précautions avec les airbag SRS Respectez les précautions suivantes concernant les airbags SRS. Autrement, des blessures graves, voire mortelles, pourraient s'ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leur ceinture de sécurité correctement. Les airbags SRS sont des dispositifs de protection complémentaires aux ceintures de sécurité.
Page 548 être grièvement blessés ou tués par le déploiement d'un airbag. Installez dans un siège de sécurité enfant les enfants trop jeunes pour pouvoir utiliser la ceinture de sécurité. Toyota recommande vivement que les nourrissons et les jeunes enfants soient installés sur le siège arrière du véhicule et convenablement attachés.
Page 549 ATTENTION ■ Précautions avec les airbag SRS ●Ne pas s'asseoir sur le bord du siège et ne pas s'appuyer contre la planche de bord. ●Ne laissez pas un enfant rester debout devant l'airbag SRS passager avant ou bien s'asseoir sur les genoux du passager avant.
Page 550 ATTENTION ■ Précautions avec les airbag SRS ● Ne fixez ni ne posez aucun objet sur la planche de bord, la garniture du volant de direction et la partie inférieure du tableau de bord. Au déploiement des airbags SRS conducteur et passager avant et de l’airbag de genoux du conducteur, ces objets risquent de se transformer en projectiles.
Page 551 Si les parties renfermant les airbags SRS, telles que la garniture du volant et les garnitures de montants avant et arrière, sont abîmées ou craquelées, faites-les remplacer par votre concessionnaire Toyota. ● Ne rien disposer sur le siège du passager avant, comme par exemple un coussin.
Page 552 ■ Modification et mise au rebut des éléments du système d'airbag SRS Consultez impérativement votre concessionnaire Toyota si vous avez besoin d'intervenir sur votre véhicule ou de procéder à l'une des modifications suivantes. Les airbags SRS risquent de ne pas fonctionner correctement ou de se déployer (gonfler) accidentellement, provoquant ainsi des blessures...
Page 553 What to do if... What to do if... A tire punctures If you have a flat tire P. 457 P. 469 If the hybrid system will not start P. 110 Immobilizer system The hybrid system does not start If the vehicle 12-volt battery is dis- P.
Page 554: Warning Lights
What to do if... ■ Warning lights Brake system warning Electric power steering system light warning light P. 432 (red indicator) Slip indicator light* P. 431 P. 432 Brake system warning light Charging system warning (yellow indicator) light P. 432 P.
Page 555: Gas Station Information
(L, Imp. qt.) (Drain and refill Without filter 3.6 (3.4, 3.0) ⎯ reference) With filter 3.9 (3.7, 3.3) Toyota Genuine Motor Oil or equivalent Oil grade: P. 493 Engine oil type ILSAC GF-5 multigrade engine oil Recommended oil viscosity: SAE 0W-20...

Toyota 2012 Prius C Owner's Manual

English

Français

Quick Links

Chapters

Related Manuals for Toyota 2012 Prius C

Summary of Contents for Toyota 2012 Prius C

Table of Contents