Toyota PRIUS 2012 Navigation System Owner's Manual page 190

SELECTING A STATION
Tune in the desired station using one
of the following methods.
Preset tuning: Touch one of the mix pre-
set channels on the left side of the screen
to select the desired station. The screen
button is highlighted and the station fre-
quency appears on the screen.
Seek tuning: Press the " " or " " button
of "SEEK/TRACK". The radio will begin
seeking up or down for a station of the
nearest frequency and will stop when a
station is found. Each time the button is
pressed, the stations will be searched au-
tomatically one after another.
To scan all the frequencies: Touch
"SCAN". "SCAN" will appear on the
screen. The radio will find the next station
and stay there for 10 seconds if "All" or
"HD Only" is selected, or 5 seconds if
"Analog" is selected, and then scan
again. To stay tuned to a station and stop
the scanning, touch "SCAN" again. (To
set HD Radio™ system, see page 267.)
1. AUDIO/VIDEO SYSTEM OPERATION
RADIO BROADCAST DATA
SYSTEM
This audio system is equipped with Ra-
dio Broadcast Data Systems (RBDS).
RBDS mode allows text messages to
be received from radio stations that uti-
lize RBDS transmitters.
When RBDS is on, the radio can
— only select stations of a particular
program type,
— display messages from radio sta-
tions,
— search for a stronger signal station.
RBDS features are available only
when listening to an FM station that
broadcasts RBDS information and the
"FM info" indicator is on.
SELECTING A DESIRED TYPE
1
Touch "Options".
PRIUS (US) NAVI 47719U
5
201
12.02.24 09:22