Toyota PRIUS 2012 Navigation System Owner's Manual page 125

1. PHONE OPERATION
2. PHONE (HANDS-FREE SYSTEM FOR CELLULAR PHONE)
The hands-free system enables calls
to be made and received without hav-
ing to take your hands off the steering
wheel.
This system supports Bluetooth
®
Bluetooth is a wireless data system
that enables cellular phones to be used
without being connected by a cable or
placed in a cradle.
The operating procedure of the phone
is explained here.
For registering and setting of the phone,
see "PHONE SETTINGS" on page 157
®
and "Bluetooth SETTINGS" on page
179.
CAUTION
●
While driving, do not use a cellular
phone or connect the Bluetooth
NOTICE
●
Do not leave your cellular phone in the
vehicle. The temperature inside may rise
to a level that could damage the phone.
134
INFORMATION
●
If your cellular phone does not support
Bluetooth
●
In the following conditions, the system
may not function:
®
.
• The cellular phone is turned off.
• The current position is outside the
communication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
●
When using Bluetooth
hands-free at the same time, the follow-
ing problems may occur:
• The Bluetooth
cut.
• Noise may be heard on the Bluetooth
audio playback.
●
This system supports the following ser-
vices:
• Bluetooth
Ver.1.1 or higher
(Recommended: Ver.2.1 + EDR or
®
phone. higher)
• Profiles
HFP (Hands Free Profile)
Ver.1.0 or higher
(Recommended: Ver.1.5 or higher)
OPP (Object Push Profile)
Ver.1.1 or higher
PBAP (Phone Book Access Profile)
Ver.1.0 or higher
MAP (Message Access Profile)
Ver.1.0 or higher
SPP (Serial Port Profile)
Ver.1.1 or higher*
*: This profile is necessary when using
Entune. (See "ENTUNE SERVICE" on
page 306.)
®
, this system cannot function.
®
audio and
®
connection may be
®
Specification
PRIUS (US) NAVI 47719U
12.02.24
®
09:22