3-5-6 PTZ control
Operation interface is as follows. The functions include: PTZ direction control, speed, zoom, focus,
iris and set operation.
Note1. Decoder A (B) line connects with DVR A (B) line. The connection is right.
2. Click [main menu] > [system configuration] > [PTZ config] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.
【Speed】Set the PTZ rotation range. Default range: 1 ~ 8.
【Zoom】Click
【Focus】Click
【Iris】Click
/
【Direction control】Controls the PTZ rotation. 8 directional control is supported. (4 directions on
Front panel are supported on the unit)
【High speed PTZ】Full-screen shows channel image. Left press mouse and control PTZ to rotate
orientation. Left press mouse and then rotate the mouse to adjust the zoom multiple of the camera.
【Set】Enter the function operation menu.
【Page switch】Switch between different pages.
Picture 3.13 PTZ setup
/
button to adjust the zoom multiple of the camera.
/
button to adjust the focus of the camera .
button to adjust the iris of the camera.
21
DVR User Manual