DVR User Manual
when the assistant code stream is turned on. Otherwise image quality precedence is valid.
4-3-4 NetService
Choose the network service option and click the set button to configure the advanced network
functions or double click the service button to configure the parameters.
Picture 4.13 NetService
【PPPoE setup】
Picture 4.14 PPPOE
Input the user name and password that ISP ( Internet service provider ) provides. After saving it
reboot your system. Then the DVR will build a network connection based on PPPoE. The IP address
will change into dynamic IP address after above operation is done.
Operation:After PPPoE dialing successfully looks up the IP address in the IP address filed. Then
use this IP address to access the DVR through user port.
41