Digisol DG-CD2030HD User Manual page 34

【Interval】Only one alarm signal is turned on even when there are several motion detect signals in
the set interval.
【Delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300
seconds.
【Record channel】Choose the recording channel (multiple option supportive). Trigger the video
signal when the alarm is turned on.
Note: Set in the [recording setup] and perform the linkage recording. Start detecting video files in
the corresponding time section.
【Tour】Means that the selective channel is single window alternate patrol preview. The interval is
set in the [Main Menu] > [System] > [Tour].
【Show message】Pop the alarm information dialog box in the local host computer screen.
【Send EMAIL】■ means sending an email to user when the alarm is turned on.
Note: Set in the [Net Service] and send email.
【Buzzer】Enable this option to give an alarm when the motion is detected.
【FTP Upload】Enable this option to upload the motion detected video to FTP server.
34
DVR User Manual