Table of Contents
Advertisement
DVR User M anual
3-5-6 PTZ control
Operation interface is as follows. The functions include: PTZ direction control, speed, zoom and set
preset.
Note:
1. Decoder A (B) line connects with DVR A (B) line. The connection is right.
2. Click [main me nu] > [system configuration] > [PTZ config] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.
Picture 3.13 Record Mode
Speed: Set the PTZ rotation range. Default range: 1 ~ 8.
Zoom: Click +/- button to adjust the zoom multiple of the camera.
Direction control: Controls the PTZ rotation. 8 directional controls are supported.
PTZ Trace: Full-screen shows channel image. Left press mouse and control PTZ to rotate
orientation. Left press mouse and then rotate the mouse to adjust the zoom multiple of the camera.
Preset (+/-): You can add Presets for supported cameras. First you select the desired point using the
PT controls and click on "+" to add preset points. In order to delete the defined preset, click on "- ".
Once you define the presets, you can select the desired preset from drop down menu & click start to
point to that specific preset location.
Advanced: Under this tab you can define:
Tour: Auto patrol for specified presets. Click "+" to add the desired presets with defined interval &
Click "-" to delete/ remove the presets defined under Tour.
19
Advertisement
Table of Contents
