Ptz Control - Digisol DG-CD1020HC User Manual

【Schedule】Record according to the configuration.
【Manual】Click the all button to manually start recording on all the channels.
【Stop】Click the stop button to stop the recording no matter what state the channels are in

3-5-6 PTZ control

Operation interface is as follows. The functions include: PTZ direction control, speed, zoom, focus,
iris and set operation.
Note1. Decoder A (B) line connects with DVR A (B) line. The connection is right.
2. Click [main menu] > [system configuration] > [PTZ config] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.
【Speed】Set the PTZ rotation range. Default range: 1 ~ 8.
【Zoom】Click
【Focus】Click
【Iris】Click
/
【Direction control】Controls the PTZ rotation. 8 directional control is supported. (4 directions on
Picture 3.12 Record Mode
Picture 3.13 PTZ setup
/ button to adjust the zoom multiple of the camera.
/ button to adjust the focus of the camera .
button to adjust the iris of the camera.
22
DVR User Manual