Digisol DG-CD2030HD User Manual page 30

Encode
configuration
Network
configuration
NetService
GUI display
PTZ Config
Serial port
Configuration
(RS232)
Tour
Digital
Storage
management
Account
management
Advanced Online User
Output Adjust
Automatic
maintenance
Set main (assistant) coding parameter: Code mode,
resolving ability, frame rate, code stream control, image
quality type, code stream value, frame between value and
video/audio enable.
Set basic network parameters, DHCP and DNS parameters,
network high speed download.
PPPOE, NTP, Email, IP preview and DDNS parameter.
Set channel name, preview hint icon state, transparency,
cover area, time title and channel time fold.
Sets channel, PTZ protocol, address, baud rate, data bit,
stop bit and check.
Set serial port function, baud rate, date bit, stop bit, check.
Set patrol mode and interval time.
Sets the channel mode and digital channel parameter
settings.
Set appointed hard disk as read-write disc, read-only disc or
redundant disc, clear data, resume date and so on.
Modify user, team or password. Add user or team. Delete
user or team.
Displays the online users connected to the DVR. You can
"Disconnect" the online users from here.
It is used to adjust the screen of your monitor/LCD
connected to the DVR.
Set automatic reboot system and automatic deleting files.
30
DVR User Manual