Basic Operation; Turn On; Turn Off - Digisol DG-CD2030HD User Manual

DVR User Manual

3 Basic operation

Note: The button in gray display indicates no support.

3-1 Turn on

Plug the power adapter and the turn on the mains. Power supply indicator light indicates turning on
the video recorder. After the startup you will hear a beep. The default setting of video output is
multiple-window output mode. If the startup time is within the video setting time, the timing video
recording function will start up automatically. Then the video indicator light of corresponding
channel is ON and the DVR is working normally.
Note: 1. Make sure that the input voltage corresponds with the switch of the DVR power supply.
2. Power supply demands: 220V±10% /50Hz.
We suggest using the UPS to protect the power supply under allowable conditions.

3-2 Turn off

Turn off the DVR by entering [main menu] and choosing [turn off] in the [turn off the system]
option.
Illumination:
1. Auto resume after power failure
If the DVR is shut down abnormally, it can automatically backup video and resume previous
working status after power failure.
2. Replace the hard disk
Before replacing the hard disk, the power supply switch in the rear panel must be turned off.
10