Delay Start - Miele TKB 350 WP Operating Instructions Manual

Delay start

Selecting Delay start
With Delay start you can delay the start
of the programme by up to a maximum
of 24 hours.
However: Delay start cannot be used
with the Warm air programme.
 After selecting the programme, touch
the  sensor.
–  will flash.
– From  to  Delay start is
selected in half-hour increments, and
from then up to  in one-hour
increments.
– If you keep your finger on the sensor,
the time will count up to .
– Touching the  sensor again when
 is in the display will delete the
time selected.
Starting Delay start
 Press the Start/Stop button.
–  lights up.
– Delay start times of more than  will
count down in hours and then in
minutes until the start of the
programme.
28
– The drum will turn briefly every hour
until the start of the programme to
reduce creasing.
Changing Delay start after it
has started counting down
 Press the Start/Stop button.
–  will flash.
 Touch the  sensor to change the
time.
 Press the Start/Stop button.
Adding or removing laundry
before a programme starts
 You can open the door to add/
remove laundry.
– All programme settings will be saved.
–  will flash.
You can change the drying level, if
required.
 Press the Start/Stop button so that
the Delay start time continues to
count down.
Cancelling Delay start
 Switch the dryer off and then on
again.