Programmable Functions; Programming - Miele TKB 350 WP Operating Instructions Manual

Programmable functions

Programming

You can use the programmable
functions to alter the dryer's
electronics to suit your requirements.
Please read the following pages
which describe the various individual
programmable functions so that you
are aware of the effect selecting the
different options will have on your
dryer.
Programming is carried out in 8 steps
(, ,  ... ) using buttons and
sensors.
I) Accessing a programmable
function
Before you begin, ensure the following:
– The tumble dryer is switched off.
– The door is closed.
 Press the Start/Stop button and
keep it pressed in whilst carrying out
steps -.
 Switch the tumble dryer on.
Wait until the indicator light for the
Start/Stop button lights up
constantly . . .
 . . . and then release the Start/Stop
button.
64
II) Selecting the programmable
function
The number of the programmable
function will appear in the display as 
and a number:
e.g. .
 Touch the  sensor to select the
other programmable functions one
by one:
Programmable function
 Cottons programme - drier or
damper
 Minimum iron programme -
drier or damper
 Extended cool down
 Buzzer volume
 Keypad tones
 PIN Code
Conductivity

 Additional drying levels
 Standby
 Automatic switch-off
Memory

 Anti-crease
 Confirm your selection of the
programmable function by pressing
the Start/Stop button.