Miele TKB 350 WP Operating Instructions Manual page 59

1. Adapter
2. Nut
3. Hose clip
4. End of the hose (secured with the
hose holder)
5. Non-return valve
6. Tumble dryer drain hose
Installation and connection
 Fit the adapter 1 to the sink drain
outlet using the nut 2.
The nut is usually fitted with a washer
which must be removed.
 Attach the end of the hose 4 to the
adapter 1.
 Use the hose holder.
 Use a screwdriver to tighten the hose
clip 3 up close to the nut.
 Fit the non-return valve 5 to the
tumble dryer drain hose 6.
The non-return valve 5 has to be
fitted so that the arrow points in the
direction of flow (i.e. towards the
sink).
 Secure the non-return valve using
hose clips.
59