Care And Cleaning - Maytag LD10D2 Service Manual

Care and Cleaning

Part
Interior, Exterior, and Door
Discharge Air Vents
Intake Discharge
Control Panel
C O OK O Z
HOLD
0 %
DEFROST
20 %
MEDIU M
50 %
MED- HI
70 %
TIME
ENTRY
STOP
RESET
START
Splatter Shields
88 888 88
C OO K OZ H E AT ER
©2004 Maytag Appliances Company
Description
Clean microwave oven with mild detergent in warm water using soft
sponge or cloth. Wring sponge or cloth to remove excess water before
wiping equipment. If desired, boil a cup of water in microwave oven to
loosen soil before cleaning.
Important:
• Do not use abrasive cleansers or cleaners containing ammonia.
These could damage finish.
• Never pour water into microwave oven bottom.
• Do not use water pressure type cleaning systems.
Check monthly for a buildup of cooking vapors along intake and
discharge louvers on bottom and back of oven. Clean air vents with
damp cloth to ensure proper airflow. Dry thoroughly.
Open oven door to deactivate oven timer. Clean with mild detergent in
warm water using soft sponge or cloth.
HEATER T/ta ble O FF
1
2
3
4
5
6
7
8
9
0
Splatter shields can be cleaned in place or removed. Clean with mild
T /ta b le O F F
detergent in warm water using soft sponge or cloth.
Splatter shields are held in place with (3) screws. If desired, remove
splatter shields for cleaning by removing screws. Replace splatter
shields before using oven.
16023053 Rev. 0 A–9