Selecting An Additional Function; Program Sequence Display; At The End Of A Program; Turning Off - Miele G 7856 Operating And Installation Instructions

Use
Selecting an additional
function
"Extra drying" can be selected as an
additional function.
^ Select the drying function directly
after a program has been selected
(not available for "Rapid", "Rinse" and
"Drain" programs).
Drying is phased over 10 minutes. The
total running time of the program
lengthens accordingly.

Program sequence display

The indicator for the active program
sequence lights up during the program.
Recharging
Pre-wash
Wash
Rinse
Dry (optional function)
26

At the end of a program

At the end of a program the "program
sequence indicators" and the "Start"
indicator go out. A "0" will appear in the
display and a buzzer sounds for 30
seconds (factory setting). The buzzer
can be changed (see "Programming
special functions").
^ If desired use the "Display" button to
see the total running time of a
program or the actual temperature.
To turn the buzzer off
^ Turn the program selector to "Stop".
or
^ Open the door.

Turning off

^ Press the "On/Off" button.