Ean-8/Jan-8 Extend; Bookland Isbn Format - Symbol CS4070 Product Reference Manual

4 - 22 CS4070 Scanner Product Reference Guide

EAN-8/JAN-8 Extend

Parameter # 39
Enable this parameter to add five leading zeros to decoded EAN-8 symbols to make them compatible in format
to EAN-13 symbols. Disable this to transmit EAN-8 symbols as is.
Enable EAN/JAN Zero Extend

Bookland ISBN Format

Parameter # 576
If you enabled Bookland EAN using
formats for Bookland data:
•
Bookland ISBN-10 - The scanner reports Bookland data starting with 978 in traditional 10-digit format
with the special Bookland check digit for backward-compatibility. Data starting with 979 is not considered
Bookland in this mode.
•
Bookland ISBN-13 - The scanner reports Bookland data (starting with either 978 or 979) as EAN-13 in
13-digit format to meet the 2007 ISBN-13 protocol.
*
Bookland ISBN-10
NOTE For Bookland EAN to function properly, first enable Bookland EAN using
on page
Supplementals, or Enable 978/979 Supplemental Mode in
page
(1)
Enable/Disable Bookland EAN on page
(0)
4-10, then select either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN
4-11.
*
Disable EAN/JAN Zero Extend
(0)
4-10, select one of the following
Bookland ISBN-13
(1)
Enable/Disable Bookland EAN
Decode UPC/EAN/JAN Supplementals on