Picklist Mode; Fuzzy 1D Processing - Symbol CS4070 Product Reference Manual

3 - 18 CS4070 Scanner Product Reference Guide

Picklist Mode

Parameter # 402
Picklist mode enables the scanner to decode only bar codes aligned under the center of the aiming pattern.
Select one of the following picklist modes:
•
Disabled Always - Picklist mode is always disabled.
•
Enabled Always - Picklist mode is always enabled.
NOTE With Picklist Mode enabled, the decode aiming pattern turns on even when the Decode Aiming Pattern on
page 7-15 is disabled.
*
Disabled Always

Fuzzy 1D Processing

Parameter # 514
This option is enabled by default to optimize decode performance on 1D bar codes, including damaged and
poor quality symbols. Disable this only if you experience time delays when decoding 2D bar codes, or in
detecting a no decode.
*
Enable Fuzzy 1D Processing
(0)
(1)
Enabled Always
(2)
Disable Fuzzy 1D Processing
(0)