Deleting Bar Codes; Transmitting Bar Code Data To Host; Transferring Data From A Batch Scanner; Transferring Data From A Bluetooth Scanner - Symbol CS4070 Product Reference Manual

2 - 2 CS4070 Scanner Product Reference Guide
NOTE Hold down the + button for 10 seconds to toggle the beeper functionality on and off.

Deleting Bar Codes

In batch mode, to delete a bar code aim the scanner at the bar code and press the delete ( - ) button.
Deleting a Bar Code in Batch Mode
Figure 2-2
NOTE Bar codes cannot be deleted in Bluetooth mode.

Transmitting Bar Code Data to Host

Transferring Data from a Batch Scanner

The BarcodeFile.txt file within the
Connect the scanner to the host via USB cable or the charging cradle and use Windows Explorer to navigate to
the scanner. Copy the bar code data file to the host.
To clear the bar code data, delete the BarcodeFile.txt file from the scanner, or scan the
page 3-9.
Autorun Feature
The scanner supports an autorun feature where you can build an autorun.inf file to automatically copy the data
to the host upon connection. Autorun.inf is a text-based configuration file that defines, upon connecting the
scanner, which executable or application to run on the host, which icon represents the scanner, and which
menu commands appear when you right-click the scanner icon from Windows Explorer. For more information,
search
autorun.inf

Transferring Data from a Bluetooth Scanner

When the scanner is paired to a host via Bluetooth, data transmits to the host after each scan and is not stored
on the device.
Out of Range Behavior
If the scanner moves out of range of the host, and does not re-pair with the host within the timeout period,
scanned data is lost and the scanner emits a 3-beep error tone.
\Scanned Barcodes
on any search engine.
directory on the scanner stores scanned bar code data.
bar code on
Clear Data