Felix to the latter category. Most of all, we made Felix so you can make great music. So, Regardless of where you end up playing, from here on , when read this manual, and then get back to work!
Super rugged 1/4” connectors with heavy duty metal bushings • Universal 100-240 AC power supply with standard IEC cable – no wall wart - take Felix anywhere in the world! • Powerful, independent EQ on both channels – hi and low shelving and full parametric midrange •...
5 Top Panel Controls and Features 2.3k 3.6k 6.4k 2.3k 3.6k 6.4k 13 14 Gain controls (Ch1&2) Signal / clip LED indicator (Ch1&2) High Pass Filter (notch) / Notch filter (Ch1&2) Low frequency shelving cut and boost (Ch1&2) Parametric Midrange cut and boost (Ch1&2) Parametric Midrange frequency select (Ch1&2) Parametric Midrange Q factor (Ch1&2) High frequency shelving cut and boost (Ch1&2)
Ch2: med - 1MΩ / hi -10MΩ / low – 332kΩ the top panel footswitch functions. This is provided for folks who will keep their Felix in a rack, on top of an amp, mounted Some pickups or sources are more sensitive to preamp input to a mic stand, or anywhere up off the floor.
Felix is muted, so you can plug in your IEM’s and can plug Felix in to the wall and he will work. And it also means practice privately during long, boring soundchecks. This can one less wall wart you’ll own in your life. All units are shipped...
If you are on a stage with an acoustic guitar, and there is all source or the other sounds best. If you are using Felix to toggle kinds of low end flying around making you sound bad, or...
High The Low control of the Felix preamplifier is fixed at 125Hz (+- 3dB) corner frequency / 40Hz peak, with a gain range of -12 The High control of the Felix preamplifier is set with a 2kHz to +12dB. This is a fixed shelving type control, which means (+/-3dB) corner frequency/ 12kHz peak, with a gain range of eveything below the 125Hz is boosted or cut.
This is a bank of 6 DIP switches, used to activate various modes This is the far left foot switch on Mr. Felix. If the unit is set blend or settings. Switches 1 & 2 select between Ch1 & Ch2’s HPF or mode via DIP switch # 6, then this switch will do nothing, and notch setting.
10.1 INSERT CABLE WIRING SEND 1/4" TS PLUG To Outboard Input Jack RING RETURN 1/4" TRS PLUG SLEEVE To Felix Insert Jack 1/4" TS PLUG To Outboard Output Jack 10.2 EXTERNAL FOOTSWITCH WIRING RING MUTE BOOST SLEEVE 1/4" TRS PLUG...
In no event will Grace Design be liable for lost profits or any other incidental, consequential or Exemplary damages, even if Grace Design is aware of the possibility of such damages. In no event will Grace Design’s liability exceed the purchase price of the product •...