Rs-232 Or Ethernet Printer Driver; Software Installation; On-Line Status Monitor - Brady IP Quick Start Manual

6. Choose to restart your computer.
7. Once your printer has restarted, ensure the added printer is powered on
and connected to your computer. Check to make sure the new printer
driver is not offline by choosing Start | Settings | Printers and right clicking
on the printer icon.
This completes the installation. Repeat this section for any additional IP
printers you will be installing on this computer.

RS-232 or Ethernet Printer Driver

To install an RS-232 or Ethernet printer driver, ensure that power is turned
OFF, connect the cable (refer to RS-232 Connection on page 7 or Ethernet
Connection on page 7 and complete steps 1 through 7 starting on page 9.

Software Installation

If you do not have BradySoft, LabelMark or IdentiLab software installed on
your computer:
1. Insert the software CD in the CD drive on your computer.
2. Follow the autoload directions for software installation.

On-line Status Monitor

The On-line Status Monitor provides printer status information. From the
Options menu, you can select Warn if no Brady Smart Supply, Always on
top or Unit of Measure (inches or mm). The Help menu provides links to
Brady Online.
Figure 9, Restart Printer Dialog Box
Quick Start Manual
11