Operations; Basic Operation - Clarion M505 Owner's Manual & Installation Manual

5. OPERATIONS

Basic Operation

Note: Be sure to read this chapter referring to the
chapter "4. CONTROLS"
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised
to the maximum level may cause hearing
damage. Be careful about adjusting the
volume.
Power On/Off
Note:
• Start the engine before using this unit.
• Be careful about using this unit for a long time
without running the engine. If you drain the
vessel battery too far, you may not be able
to start the engine and this can reduce the
service life of the battery.
1. Start the engine. The power button / knob illumination
on the unit will light up.
2. Press the [ / SRC ] button to turn on the power
under standby mode. Press and hold to turn off the
power.
Mute
Press the [MUTE] button to turn the mute On and Off.
Adjusting the volume
Rotating the [VOLUME] knob to increase/decrease the
volume.
The adjustable range of volume is 0 to 46.
CAUTION
While boating, keep the volume at a level at which
external sounds can still be heard.
Engine ON
position
Selecting a mode
Press the [ / SRC ] button to display the source menu.
* External equipment not connected to this unit is not
displayed.
Display System information
Press the [DISP] button on the front panel to switch the
display information, system time and playing source.
Display OFF/ON
This feature will allow the user to turn the display OFF
in the event the display is too bright in different lighting
conditions.
To use this feature, please follow these steps:
1. To turn the display OFF, press and hold the [MUTE]
button and the display will turn OFF, but the audio
from the current source will continue to play.
2. To turn the display ON, press and hold the [MUTE]
button and the display will turn back ON.
** With the display OFF, the ability to change tracks and
adjust the volume will still remain.**
7
M205/M505