Before First Use - KRAUSE & BECKER 60446 Owner's Manual & Safety Instructions

Delayed or inadequate cleaning will permanently clog the Spray Gun.
Latex paint hardens quickly and permanently inside Spray Gun.

Before First Use

NOTICE: Before first use, clean the
Spray Gun thoroughly.
If not removed, the material used
for testing and corrosion prevention
will contaminate material.
Note: Do not immerse
Spray Gun Body in liquid.
1. Unplug the Spray Gun from
its electrical outlet.
2. Remove the Container.
3. Fill the Container with warm soapy
water, then replace the Container.
4. Attach a Nozzle.
5. Plug the Spray Gun into an electrical outlet.
6. Depress the Trigger to spray the warm
soapy water through the Spray Gun and into
a bucket, while shaking the Spray Gun.
7. Fill the Container with plain warm water.
8. Depress the Trigger to spray the plain warm
water through the Spray Gun and into a
bucket, while shaking the Spray Gun.
Page 10
NOTICE
Clean the Spray Gun IMMEDIATELY after EVERY use.
For technical questions, please call 1-888-866-5797.
9. Unplug the Spray Gun from
its electrical outlet.
10. Remove the Container and Suction
Tube, then thoroughly dry all parts.
11. Apply a few drops of spray gun
lubricant as indicated in Figure C.
pump
Housing
Figure C
12. Reassemble the Spray Gun.
Oil
Here
Item 60446