KRAUSE & BECKER 60446 Owner's Manual & Safety Instructions page 9

Delayed or inadequate cleaning will permanently clog the Spray Gun.
Latex paint hardens quickly and permanently inside Spray Gun.
Operation
Read the ENTIRE IMpORTANT SAFETY INFORMATION section at the beginning of
this manual including all text under subheadings therein before set up or use of
this product.
TO pREVENT SERIOUS INJURY:
Inspect tool before use, looking for damaged, loose, and missing parts.
If any problems are found, do not use tool until repaired.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Workpiece and Work Area Set Up
1. Designate a work area that is clean
and well lit. The work area must not
allow access by children or pets to
prevent distraction and injury.
Item 60446
NOTICE
Clean the Spray Gun IMMEDIATELY after EVERY use.
For technical questions, please call 1-888-866-5797.
2. Before spraying, mask nearby
objects not being sprayed and
lay cloths (not included) on the floors.
Page 9